摘要
提出了一种可通过循环运动完成升降功能,且稳定、可靠的模块组合式立体循环自行车库系统设计方法。首先介绍了该车库的基本工作原理;然后对车库结构进行了设计,主要包括二级模块尺寸设计和行星轮系设计,并采用Pro/E软件完成了三维建模。为了防止运动过程中发生干涉,采用MATLAB软件完成了车库模块的运动学分析和优化设计。
In this article,a bicycle garage system featuring module assembly and vertical circulation is presented.It,stable and reliable as it is,can be lifted through cyclic motions.First,the basic principle of the garage is introduced;then,is structural design is described,including the size of two-level modules and the planetary gear system.Besides,the 3 D modeling is carried out with the aid of the Pro/E software.In order to prevent interference during the movement,the MATLAB software is adopted for the kinematic analysis and optimization of the garage.
作者
刘承磊
薛涛
王澄
张案源
曾祥寿
刘凉
朱培浩
LIU Cheng-lei;XUE Tao;WANG Cheng;ZHANG An-yuan;ZENG Xiang-shou;LIU Liang;ZHU Pei-hao(Tianjin University of Technology,Tianjin300384;National Demonstration Center for Experimental Mechanical and Electrical Engineering Education,Tianjin University of Technology,Tianjin300384)
出处
《机械设计》
CSCD
北大核心
2019年第4期60-65,共6页
Journal of Machine Design
基金
天津市应用基础与前沿技术研究计划资助项目(17JCYBJC18300)
天津市大学生创新创业训练计划资助项目(201710060071)
关键词
模块组合
立体循环
自行车库
系统设计
module assembly
vertical circulation
bicycle garage
system design
