基于西门子PLC控制的一种分模机

A parting machine based on Siemens PLC control

随着工业自动化和智能化的不断发展,压机和模具的自动化智能化水平也越来越高。这对模具制造和维修提出了更高的要求。在模具研配和维修时,需要先将上下模具分离后,分别对上下模进行研配、维修、拆分、清洗等工作。传统工业利用手工分模耗时耗力,使用工具分模时容易造成模具损伤。采用分模机可显著提高分模工作效率,同时保证操作人员和模具的安全。分模机的电气控制系统,采用了西门子S7-1500系列PLC进行编程控制。分模机翻转装置和升降装置采用西门子伺服电机控制,保证翻转和升降动作有效可靠。同时分模机采用1511T运动型CPU对分模机左右两侧电机和丝杠进行同步控制,保证分模机水平和垂直精度,从而保证模具开模、合模精度。

With the continuous development of industrial automation and intelligence,the level of automation and automation of presses and molds is getting higher and higher.This puts higher demands on mold manufacturing and maintenance.In the mold research and maintenance,it is necessary to separate the upper and lower molds,and then separately research,repair,split,and clean the upper and lower molds.Traditional industries use manual parting and are time-consuming and labor-intensive,and it is easy to cause mold damage when using tool splitting.The use of a parting machine can significantly improve the efficiency of the parting work while ensuring the safety of the operator and the mold.The electrical control system of the parting machine is programmed by Siemens S7-1500 series PLC.The parting machine turning device and the lifting device are controlled by Siemens servo motor to ensure the turning and lifting action is effective and reliable.At the same time,the parting machine adopts 1511 T motion type CPU to synchronously control the motor and screw on the left and right sides of the parting machine to ensure the horizontal and vertical precision of the parting machine,thus ensuring the mold opening and clamping precision.