冰箱内胆多工位成型线输送部分的两种典型结构

The two typical structure of the conveyor parts for multi-station vacuum forming lines for making refrigerator liner

在国内电冰箱生产行业中各大生产厂,作为标准配置的生产门体及箱体内胆的多工位真空成型线,其输送部分是将该多工位成型线的各工位串接在一起,是整条生产线能够具有工作稳定性、协调性的基石,因而对于其输送部分结构的合理性、可靠性、稳定性显得尤为重要。目前在此类多工位的真空成型线中,逐步形成了以链条输送结构与夹钳输送结构为主的两大类典型输送结构,本文就此给出了此两类输送结构的简要说明及主要特征。

In Chinese bigger refrigerator factories,the multi-station vacuum forming lines are widely used for making the inner liner for door and cabinet.As the conveyor unit(which connected all working stations)is the bedrock for working stability and coordination in multi-station vacuum forming lines,the reasonable structure of conveyor unit is the most important.At present,mainly there are two kinds of the conveyor structures:the chain type and the clamp type.This paper gives a brief description of the two types of structures and the corresponding characteristic.