期刊文献+

新型可曲挠耐高压短臂法兰介绍

Introduction of short arm stainless steel flange
下载PDF
导出
摘要 符合《钢制管法兰类型与参数》(GB/T 9112-2010)的法兰(定义为长臂法兰)的规格、尺寸及其配管均按有腐蚀的碳钢管道标准设计。当将其应用于不锈钢管道时,由于不锈钢无需预留腐蚀余量,因此存在法兰材料消耗大的弊端。在保证同样抗曲挠能力的前提下,提出一种不锈钢短臂法兰。通过对长、短臂法兰的力学数据进行比较和分析,证实短臂法兰的臂长和厚度均可设计为长臂法兰的一半左右,并给出了与短臂法兰配套的限位密封措施。 The specification,dimension and pipe of the flange,which compiles GB/T 9112-2010 Types and parameters for steel pipe flanges(defined as long arm flange in this paper),is designed according to the standard of carbon steel considering the corrosion.When applied to stainless steel pipeline,the disadvantage of this design is the large consumption of flange material because stainless steel does not need reserved allowance of corrosion.In this paper,under the condition of keeping the same deflection degree capability,a short arm stainless steel flange was proposed,and the mechanics data of short and long arm flanges were compared and analyzed.It was verified that the arm length and thickness of short arm flange could be designed to be about one half that of long arm flange.The corresponding limit seal measure of short arm flange was provided.
作者 黄华 王耳其 高亮娟 李佩雯 廖忠烈 Huang Hua;Wang Erqi;Gao Liangjuan;Li Peiwen;Liao Zhonglie(Sichuan University,Chengdu610065,China;China Southwest Architectural Design and Research Institute Corp.,Ltd.,Chengdu610041,China;Purdue University,West LafayetteIN47907,USA;Sichuan Minsheng Stainless Steel Pipes Co.,Ltd.,Chengdu610037,China)
出处 《给水排水》 CSCD 北大核心 2019年第5期109-112,共4页 Water & Wastewater Engineering
关键词 长臂法兰 短臂法兰 不锈钢管道 曲挠度 限位密封 Long arm flange Short arm flange Stainless steel pipe Deflection degree Limit seal
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部