期刊文献+

基于多传感器融合的磨削砂轮钝化的智能监测 被引量:9

Intelligent Monitoring for Grinding wheel Passivation Based on Multi-sensor Fusion
下载PDF
导出
摘要 利用多传感器信息融合技术 ,通过模糊分类的方法对不同的磨削条件进行模糊化处理 ,构建了砂轮钝化监测多传感器融合系统结构 ;应用BP神经网络将磨削过程中声发射、磨削力和功率传感器信号合理融合 ,提出了自适应变学习率策略 ,将其神经网络输出的信号特征值作为表征砂轮钝化状态识别的判据 ,进行了砂轮钝化监测实验·结果表明 ,使用多传感器信息融合方法比使用单一传感器方法识别率高 ,监测效果好 。 The multi sensor fusion system was established to monitor the passivation status of grinding wheel. BP neural network was used to interfuse reasonably the acoustic emission signal, grinding force signal and power sensor signal. The output eigenvalue of the neural network was considered as a criterion to distinguish the passivation status of grinding wheel. A self adaptive learning strategy was brought forward. A grinding wheel passivation experiment was done. The multi sensor infusion method can get higher recognition rate and better monitoring effect than a single sensor. In this way, intelligent monitor can be realized and the grinding wheel can be dressed in time.
出处 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2003年第3期248-251,共4页 Journal of Northeastern University(Natural Science)
基金 教育部科学技术研究重点资助项目 ( 2 0 0 3 2 )
关键词 多传感器融合 砂轮钝化 模糊分类 BP神经网络 智能监测 磨削 multi sensor fusion wheel passivatio fuzzy classifying BP neural network intelligent monitoring grinding
  • 相关文献

参考文献10

  • 1Gong Y D, Liu G J, Wang W S. Research on grinding wheel intelligent dressing system[J]. Key Engineering Materials, 2001,202-203(6):181-184.
  • 2Karpuschewski B, Wehmeier M, Inasaki I. Grinding monitoring system based on power and acoustic emission sensors[J]. Annals of the CIRP, 2000,49(1):235-240.
  • 3Webster J, Marinescu I, Bennett R. Acoustic emission for control and monitoring of surface integrity during grinding[J]. Annals of the CIRP, 1994,43(1):299-304.
  • 4蔡光起 巩亚东 宋贵亮译.磨削技术理论与应用[M].沈阳:东北大学出版社,2002..
  • 5Varghese B, Parhare S, Gao R, et al. Development of a sensor-integrated"intelligent" grinding wheel for in-process monitoring[J]. Annals of the CIRP, 2000,49(1):231-234.
  • 6Li G F, Wang L S, Yang L B. Multi-parameter optimization and control of the cylindrical grinding process[J]. Journal of Materials Processing Technology, 2002,129(1):232-236.
  • 7Shi J F, Hong Z C, Cao J. On-line intelligent identification in Grinding Process based on rough sets theory[J]. Key Engineering Materials, 2001,202-203(6):189-192.
  • 8巩亚东,王宛山.磨削加工的声发射信号分析[J].东北大学学报(自然科学版),1998,19(1):72-74. 被引量:5
  • 9巩亚东,王宛山.声发射磨削接触检测系统的研制[J].东北大学学报(自然科学版),1997,18(6):667-670. 被引量:10
  • 10吕洋,巩亚东,王宛山.基于多传感器融合的砂轮状态监测方法研究[J].机械设计与制造,2001(6):90-91. 被引量:4

二级参考文献16

  • 1郁文贤,雍少为,郭桂蓉.多传感器信息融合技术述评[J].国防科技大学学报,1994,16(3):1-11. 被引量:158
  • 2孙增圻.智能控制理论与技术[M].北京,广西:清华大学出版社,广西科学技术出版社,2000..
  • 3周富荣,机床,1993年,2期,28页
  • 4朱铭铨,磨床与磨削,1990年,12期,30页
  • 5袁振明,声发射检测,1985年,5页
  • 6穆玉海,磨料磨具与磨削,1994年,2卷,80期,19页
  • 7陈典正,磨床与磨削,1993年,3期,64页
  • 8朱铭铨,磨床与磨削,1992年,2期,7页
  • 9袁振明,无损检测,1990年,13卷,10期,271页
  • 10陈明,机械科学与技术,1994年,1期,15页

共引文献17

同被引文献127

引证文献9

二级引证文献44

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部