期刊文献+

好氧浮动床生物膜反应器运行参数的试验研究 被引量:6

A Test of Operating Parameters of An Aerobic Floating Bed Biomembrane Reactor
下载PDF
导出
摘要 通过对中试规模的浮动床生物膜反应器处理混合化工废水的试验研究,探讨了水力停留时间、污泥负荷、温度等对反应器处理性能与效果的影响。试验结果表明:水力停留时间在13.4h,14.4h,15.6h,17h时CODCr的平均去除率分别为74%,77%,77%,81%;污泥负荷范围在0.17~0.77kg犤BOD5犦/(kg犤MLSS犦·d)内,BOD5去除率先呈上升趋势,而后呈下降趋势;水温在8~10℃时,水力停留时间为11.7~15h,CODCr去除效率在57.7%~65.8%之间,BOD5去除率在76.3%~85.4%之间。 A pilot test of floating bed biomembrane reactor for the treatment of mixed chemical wastewater was carried out to study the effects of HRT, sludge loading rate and temperature on the treatment performance of the reactor and the results of the treatment. The results showed that when the HRT was 13.4 hrs, 14.4 hrs, 15.6 hrs and 17.0 hrs, the average removal rate of CODCr was 74%, 77%, 77%and 81%respectively; when the sludge loading rate was within the range of 0.17~0.77 kg/(kg·d), the removal rate of BOD5 tended to increase first and to decrease then; and when the water temperature was 8℃~10℃and the HRT was 11.7 hrs~15.0 hrs, the CODCr removal rate was 57.7%~65.8%and the removal rate of BOD5 was 76.3%~85.4%.
出处 《工业用水与废水》 CAS 2003年第1期5-8,共4页 Industrial Water & Wastewater
基金 .NULL.
关键词 好氧浮动床 生物膜反应器 运行参数 试验研究 化工废水处理 悬浮填料 chemical wastewater wastewater treatment floating bed biomembrane reactor suspended packing
  • 相关文献

参考文献3

  • 1[1]C H Johnson,M W Page,L Blaha.Full scale moving bed biofilm reactor results from refinery and slaughter house treatment facilities[J]. Wat Sci & Tch, 2000, 41(4- 5): 401- 407.
  • 2[2]B Rusten,B G Hellstrom,F Hellstrom,et al. Piolot testing and preliminary design of moving bed biofilm reactors for nitrigen removal at the FREVAR wastewater treatment plant[J]. Wat Sci& Tech,2000,41(4- 5):13- 20.
  • 3[3]Ruste B,McCopy M,Proctor R,et al.The innovative moving bed biofilm reactor/solid contact reaeration process for secondary treatment of municipal wastewater[J]. Water Environment Research,1998,70(5):1083- 1089.

同被引文献91

引证文献6

二级引证文献52

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部