期刊文献+

单体配比对水凝胶接触镜材料溶胀性能的影响 被引量:1

Influence of Monomer Proportion on Swelling Properties of Copolymer Hydrogel for Contact Lens
下载PDF
导出
摘要 以过氧化苯甲酰为引发剂,N-乙烯基吡咯烷酮(NVP)、甲基丙烯酸β-羟乙酯(HEMA)以及甲基丙烯酸酯共聚制备水凝胶,研究了该水凝胶的溶胀性能.实验发现,随NVP含量的增大,水凝胶的平衡溶胀度增大;少量甲基丙烯酸酯的加入,可较小幅度地降低共聚物水凝胶的平衡溶胀度,其中甲基丙烯酸乙酯所导致水凝胶平衡溶胀度下降幅度最低;TG分析表明,N-乙烯基吡咯烷酮与甲基丙烯酸β-羟乙酯二元共聚物水凝胶中的自由水容易脱水,而添加甲基丙烯酸酯可以增强水凝胶的抗脱水性能,尤其以甲基丙烯酸乙酯较为明显. In this paper,hydrogel contact lens material is synthesized by copolymerization of NVP?HEMA and methacrylate,and the swelling properties of the hydrogel is studied .It is found that the water content of the hydrogel increases with the increase of NVP in the hydrogel while decreases with the adding of methacrylate.TG patterns shows that the free water in the hydrogel is easy to dehydrate,and methacrylate can slow down the dehydration process.
出处 《广东工业大学学报》 CAS 2003年第1期11-15,共5页 Journal of Guangdong University of Technology
基金 国家自然科学基金(29976007) 广东省自然科学基金(990129)资助项目.
关键词 单体配比 溶胀性能 N-乙烯基吡咯烷酮 NVP 甲基丙烯酸Β-羟乙酯 HEMA 水凝胶 角膜接触镜 脱水 隐形眼镜 N-vinylpyrrolidone 2-hydroxyethyl methacrylate hydrogel,contact lens swelling dehydration
  • 相关文献

参考文献4

二级参考文献1

  • 1E.-M. Hehl,R. Beck,K. Luthard,R. Guthoff,B. Drewelow. Improved penetration of aminoglycosides and fluoroquinolones into the aqueous humour of patients by means of Acuvue contact lenses[J] 1999,European Journal of Clinical Pharmacology(4):317~323

共引文献37

同被引文献11

  • 1庄银凤,杨华,王国伟,朱仲祺,任方方,宋伟强,赵惠东.P(NIPA-co-HEMA)与PNIPA/P(HEMA)IPN水凝胶的辐射聚合与可控缓释研究[J].辐射研究与辐射工艺学报,2004,22(5):266-270. 被引量:4
  • 2Hegazy E S A, Abd EI-Aal S E, Abou Taleb M F, et al. Radiation synthesis and characterization of poly (N-vinyl-2-pyrrolidone/acrylic acid) and poly (N-vinyl-2-pyrrolidone/acrylarnide) hydrogels for some metal-ion separation[J]. J. Appl. Polym. Sci., 2004, 92: 2642-2652.
  • 3Pojman J A, Curtis G, llya.shenko V M. Frontal polymerization inmlution[J]. J. Am. Chem. Soc., 1996, 118: 3783-3784.
  • 4Sanna R, Alzari V, Nuvoli D, et al. Polymer hydrogels of 2- hydroxyethyl acrylate and acrylic acid obtained by frontal polymerization[J]. J. Polym. Sei. Part A: Polym. Chem., 2012, 50: 1515-1520.
  • 5Fang Y, Yu H, Chen L, et al. Facile glycerol-assisted synthesis of N-vinyl pyrrolidinone-based thermosensitive hydrogels via frontal polymerization[J]. Chem. Mater., 2009, 21:4711-4718.
  • 6Zhou Z F, Yu C, Wang X Q, et al. Facile access to poly (NMA-co- VCL) hydrogels via long range laser ignited frontal polymerization [J]. J. Mater. Chin. A, 2013, 1: 7326-7331.
  • 7Liska R, Schwager F, Maier C, et al. Water-soluble photopolymers for rapid prototyping of cellular rnaterials[J ].J Appl. Polym. Sci., 2005, 97: 2286-2298.
  • 8Tredici A, Pecchini R, Morbidelli M. Self-propagating frontal copolymerization[J]. J. Polym. Sei. Part A: Polym. Chem., 1998, 36: 1117-1126.
  • 9华慢,龚元元,梁晖,卢江.反相悬浮聚合法制备球状卡波树脂的研究[J].高分子学报,2013,23(9):1165-1171. 被引量:1
  • 10江春梅,牟建新,刘利明,王婷婷,张春玲.pH敏感性水凝胶P(MAPOSS-co-AA)的制备及药物缓释性能[J].高分子材料科学与工程,2014,30(3):144-148. 被引量:5

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部