真空袋压法在航空透明件胶接中的应用试验分析
Analysis on the Application of Vacuum Bag Pressure Method on Adhesive Bonding of Aerospace Transparency
摘要
通过传统加压法和真空袋压法分别对航空透明件胶接试验模型加压固化,测量模型的拉伸剪切强度并进行对比分析,总结了真空袋压法相对于传统加压法的优越性。
出处
《航空维修与工程》
2019年第2期32-35,共4页
Aviation Maintenance & Engineering
关键词
真空袋压法
航空透明件
对比分析
vacuum bag pressure method
aerospace transparency
contrastive analysis
参考文献3
-
1周赤奇,金翔,彭劲松.阻尼材料安装真空袋压法施压固化工艺试验研究[J].船舶工程,2010,32(S2):117-120. 被引量:2
-
2邓火英,张佐光,顾轶卓,李敏.L形层板真空袋成型缺陷的实验研究[J].复合材料学报,2007,24(4):34-39. 被引量:10
-
3张自龙,庄伟涛.玻璃纤维增强塑料-真空袋压成型过程检验要点[J].华东科技(学术版),2016,0(5):463-463. 被引量:2
二级参考文献10
-
1郭战胜,杜善义,张博明,武湛君,李方,傅求理.先进复合材料用环氧树脂的固化反应和化学流变[J].复合材料学报,2004,21(4):146-151. 被引量:57
-
2Naji M I,Hoa S V.Curing of thick angle-bend thermoset composite part:Curing cycle effect on thickness variation and fiber volume fraction[J].Journal of Reinforced Plastics and Composites,1999,18(8):702-723.
-
3Naji M I,Hoa S V.Curing of thick angle-bend thermoset composite part:Curing process modification for uniform thickness and uniform fiber volume fraction distribution[J].Journal of Composites Materials,2000,34(20):1710-1755.
-
4Hubert Pascal,Vaziri Reza,Poursartip Anoush.A twodimensional flow model for the process simulation of complex shape composite laminates[J].International Journal for Numerical Methods in Engineering,1999,44(1):1-26.
-
5Hubert Pascal,Poursartip Anoush.A review of flow and compaction modeling relevant to thermoset matrix laminate processing[J].Journal of Reinforced Plastics and Composites,1998,17(4):286-318.
-
6Hubert Pascal,Poursartip Anoush.Aspects of the compaction of composite angle laminates:An experimental investigation[J].Journal of Composite Materials,2001,35(1):2-26.
-
7Li Min,Tucker Ⅲ C L.Modeling and simulation of twodimensional consolidation for thermoset matrix composites[J].Composites Part A,2002,33(6):877-892.
-
8董永祺.欧美真空袋压注入树脂(SCRIMP)工艺的新进展[J].渔业现代化,1997(4):30-33. 被引量:1
-
9中国船级社,纤维增强塑料船体材料,材料与焊接规范2012(S).
-
10中华人民共和国船舶检验局,纤维增强塑料船舶建造规范1991(S).
共引文献9
-
1谢富原,王雪明,李敏,戴棣,王菲,张佐光.复合材料结构几何要素与制造缺陷的关联分析[J].材料工程,2009,37(S1):84-88. 被引量:4
-
2李君,姚学锋,刘应华,岑章志,寇哲君,戴棣.复合材料T型整体化结构固化翘曲变形模拟[J].复合材料学报,2009,26(1):156-161. 被引量:36
-
3王雪明,谢富原,李敏,戴棣,王菲,张佐光.热压罐成型复合材料复杂结构对制造缺陷的影响规律[J].航空学报,2009,30(4):757-762. 被引量:27
-
4陈越超,周晓军,杨辰龙,李钊.L型CFRP构件R区微观形态及孔隙特征[J].浙江大学学报(工学版),2014,48(10):1775-1780. 被引量:3
-
5李钊,周晓军,杨辰龙,陈越超,李雄兵.曲面变厚度编织CFRP微观形态与孔隙特征分析[J].中南大学学报(自然科学版),2015,46(3):829-834. 被引量:2
-
6丁常方,张晶,褚洪杰,尹亮,郑国栋.基于ABAQUS软件的U形薄壳加肋结构热变形分析[J].玻璃钢/复合材料,2017(12):41-44. 被引量:1
-
7张昆桥,张江涛,张梅,翟鹏程.固化压力对厚L形CFRP单向板纤维分布影响的实验研究[J].复合材料科学与工程,2020,0(2):85-90.
-
8李志涛,郭聪聪,单瑞俊,王怡敏,毛慧文,尹国强.碳纤维增强阻燃树脂基复合材料的制备及性能研究[J].高科技纤维与应用,2020,45(5):25-33. 被引量:4
-
9王雪明,李韶亮,谢富原.热压罐成型复合材料构件曲率半径对制造缺陷的影响规律[J].航空材料学报,2020,40(6):90-96. 被引量:6
-
1刘长江,李琼,陈益滨,张远芳,张震.有压冻融循环下亚氯盐渍土融陷特性试验分析[J].科学技术与工程,2019,19(10):163-167. 被引量:3
-
2龚淑娟.轻量化车身工艺的重大突破[J].汽车制造业,2019,0(7):56-57.
-
3刘畅,杨文锋,徐艺,张殊伦,李绍龙.激光表面处理技术在复合材料胶接维修中的应用研究[J].航空维修与工程,2019,0(3):32-36. 被引量:1
-
4阴鹰,陈学群,林莉,付芳.甲泼尼龙联合负压引流治疗耳廓假性囊肿临床观察[J].基层医学论坛,2019,23(14):2064-2066. 被引量:2
-
5王晨晨.基于OpenSees的预应力预制装配式框架节点的有限元模型[J].现代信息科技,2019,3(6):12-13.
-
6游彦宇,吴茂庆,赵红旗,李占山.××环氧胶黏剂用于某航空发动机外涵机匣内表面修复的可行性研究[J].玻璃钢/复合材料,2019(4):37-42. 被引量:1
-
7孙思薇,李冰.高速无梭织机钢筘用胶粘剂的制备及其性能研究[J].现代纺织技术,2019,27(3):82-86. 被引量:1
-
8韩贤波.水曲柳育苗技术要点与造林技术[J].农民致富之友,2019(10):207-207. 被引量:3
-
9国内文摘与专利[J].绝缘材料,2019,52(3):92-96.
-
10夏寅鹏,赵伟,徐宇,马寅虎.GFRP层压板不同处理对胶粘剂剪切性能的影响[J].化工管理,2019(10):114-116.