摘要
研究炭黑改性低顺式聚丁二烯橡胶(LCBR)在缺气保用轮胎支撑胶中的应用。结果表明:采用炭黑改性LCBR替代顺丁橡胶,胶料的硫化特性变化不大,焦烧时间延长,加工性能略有下降;定伸应力有所提高,拉伸强度和拉断伸长率变化不大;生热大幅降低;采用炭黑改性LCBR制备的缺气保用轮胎的零气压耐久性能更好。
The application of carbon black modified low cis-polybutadiene rubber(LCBR) in the side support compound of run-flat tire was studied. The results showed that using carbon black modified LCBR instead of butadiene rubber,the curing characteristics of the compound changed little,the scorch time was prolonged,the processing properties were slightly decreased,the modulus of the vulcanizates was improved,the tensile strength and elongation at break were kept the same,and the heat build-up was greatly reduced. The zero-pressure endurance of the run-flat tire with carbon black modified LCBR in the side support compound was improved.
出处
《轮胎工业》
CAS
2018年第10期601-604,共4页
Tire Industry
关键词
低顺式聚丁二烯橡胶
炭黑
改性
缺气保用轮胎
支撑胶
生热
零气压耐久性能
low cis-polybutadiene rubber
carbon black
modification
run-flat tire
side support compound
heat build-up
zero-pressure endurance