期刊文献+

水煤膏冷态雾化试验装置和测量系统的研究 被引量:2

The Study of a Cold-state Atomization Test Rig and a Measurement System for Coal-water Paste
下载PDF
导出
摘要 建立了一套垂直式水煤膏雾化试验装置 ,提出了通过采用PIV技术及二次开发的图像处理软件来测量水煤膏雾化颗粒的平均粒径与分布的方法 ,分析了水煤膏雾化颗粒测量的影响因素 。 A vertical test rig for the atomization study of coal-water paste has been set up and a method proposed for measuring the particle average diameter and distribution of water coal paste atomized particles with the use of a PIV (particle image velocimetry) technique and a newly developed image processing software. All factors, which may have an impact on the measurement of the coal water paste atomized particles, are analyzed, creating a solid basis for the further research of the nozzle atomization properties of the coal water paste.
出处 《热能动力工程》 CAS CSCD 北大核心 2003年第2期147-150,共4页 Journal of Engineering for Thermal Energy and Power
基金 国家重点基础研究发展规划基金资助项目 (G19990 2 2 10 5 3 1)
关键词 水煤膏 雾化 试验装置 粒径测量 PIV coal water paste, atomization, test rig, particle size measurement, particle image velocimetry
  • 相关文献

参考文献3

二级参考文献2

共引文献10

同被引文献28

  • 1陆勇,吴树志,朱伯友,胡斌综,汪凤铃,王式民.应用PTV技术测量脱硫塔内流场颗粒总数及颗粒粒径分布的研究[J].石油工业技术监督,2001,17(8):5-7. 被引量:3
  • 2卢平,章名耀.水煤膏喷嘴雾化机理及影响因素分析[J].南京师范大学学报(工程技术版),2002,2(2):61-65. 被引量:1
  • 3张荣增.水煤浆制浆技术[M].北京:科学出版社,1996..
  • 4章名耀.增压流化床联合循环发电技术[M].南京:东南大学出版社,1998..
  • 5蒋旭光 等.用作增压流化床燃料的粗颗粒煤水混合物的稳定性及流变性的研究[J].洁净煤燃烧与发电技术,1994,(3):13-17.
  • 6孟令杰.煤水混合物(水煤膏)稳定性评价研究[J].洁净煤燃烧与发电技术,1996,(3):5-8.
  • 7[6]Dinger, B.R. et al. stability of a coal-water slurry[A],Co-Al, Proc. of 4th Intern. Symp. on Coal Slurry Combustion[C], 1982.
  • 8[7]沈雅闲.水煤浆沉降稳定性评价研究,水煤浆技术译文集[M].北京:中国煤炭加工利用协会,1987.
  • 9[8]Batra S. K. , et al. Rheology and pumping characteristics of coal water slurry fuels prepared in Columbia Chase Integrator[A], Proc. of 5th Intern. Symp. on Coal Slurry Combustion[C], 1983.
  • 10[12]Takezaki H, Otani Y, Yoshioka S, et al. A method of state feeding coal-water paste into pressurized fluidized bed combustor [A]. In: Rubw L and Commonwealth G eds. Proc of 12th International Conference on FBC [C].San Diego, California, USA: ASME, 1993. 397-401.

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部