摘要
报道了微波在线消解流动注射光度分析方法测定环境废水中总磷。研究了消解管路的长度和内径,消解剂的种类和微波功率等实验参数的影响。每小时可分析20~25个水样,方法的测定精度为RSD=1 5%(n=10),废水样品中总磷的测定结果与德国标准分析方法一致。
A on-line microwave digestion flow injection system is described for the determination of total phosphorus in waste water samples with spectrophotometric detection in this paperThe optimization of experimental parameters such as length and diameter of digestion tube,reagent concentration,and microwave power were discussedCalibration has been found to be linear to 10 mg/L phosphorusWaste water samples can be analyzed at a rate of 20-25 samples per hour with a typical RSD of 15%(n=10)The determination results for total phosphorus in waste water samples agree with those obtained by standard digestion method from a German industrial standard(DIN)
出处
《冶金分析》
CAS
CSCD
北大核心
2003年第2期1-4,共4页
Metallurgical Analysis