期刊文献+

铀氢锆燃料芯块的测氢装置

Device of Measuring Hydrogen in U-H-Zr Fuel Pellet
下载PDF
导出
摘要 本文介绍了铀氢锆燃料中氢含量的测定装置及该装置的精密度测定,对不同的载气流量、提取温度及收集时间的影响分别作了测试研究。当载气流量在85—100ml/min,提取温度由900℃增至1550℃时最佳的收集时间可由30分钟减至18分钟;对氢含量为1.89wt%氢化锆参考标样的测定指出,六次测定的精密度优于±2%,测量误差为2%,氢的回收率达99.3%。测试应用表明本装置及其测试方法稳定且操作简单。 This paper introduces a device used for the determination of hydrogen content in U-H-Zr fuel pellet and its precision deter-mination.The influence of different flow of carry gas,extrac-ting temperature and collecting time on the determination of hy-drogen content is researched separately.While the flow of carrygas is 85—100 mL/min and extracting temperature increasing to1550℃ from 900℃,the best collecting time may be reduced to 18 minfrom 30 min,the determination of zirconium hyrogenate refe-rence standard sample shows that the precision of six time dete-rmination is smaller than ±2%,determination error is 2%.Therate of recovery of hydrogen is 99.3%.The test shows that thedevice and its determination method are stable and operation issimple.
出处 《核动力工程》 EI CAS CSCD 北大核心 1992年第1期63-66,83,共5页 Nuclear Power Engineering
关键词 载气流量 铀氢锆燃料 测氢装置 Flow of carry gas Extracting temperature Collecting time Precision
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部