打捆机箱体轻量化的研究

Study of lightweight bundling machine box

在对国内外多种打捆机研究的基础上,提出了一种对打捆机箱体进行轻量化的方法。箱体是打捆机上的基础零件,也是非常重要的承载部分。设计箱体时,为了保证打捆机在工作的时候安全、可靠,传统方法会选择很大的安全系数,这样就造成了打捆机箱体的大小和重量都会非常大。在满足安全系数和正常工作的前提下,减轻箱体重量是非常必要的,这样可以节约材料,并且降低能源的消耗。使用SolidWorks软件对打捆机箱体进行三维建模、有限元分析,最终分析出一个满足要求的轻量化模型。

In studies on a variety of domestic and international baler proposed based on a body is lightweight chassis for bundling approach. Box is the basis baler parts on the load-bearing part are also very important. When designing the box, in order to ensure baler at work safe, reliable, traditional methods will choose a great safety factor, thus causing the bale size and weight of the chassis body will be very large. Under normal operation to meet the safety factor and the premise is necessary to reduce the weight of the box, so you can save materials and reduce energy consumption. Use SolidWorks software bundled chassis body three-dimensional modeling, finite element analysis, the final analysis to meet the requirements of a lightweight model.