摘要
CuCr25 alloys containing different Ni content were prepared by vacuum induction melting (VIM). The micro structure and properties were tested. The results show that with the increase of Ni content in CuCr25 alloys, the Cr phase changed from developed dendrite into nodular grains and was drastically refined; the electrical conductivity significantly decrease, but still reach the level of conventional CuCr50 when the Ni content is below 0.5%. The Ni content had little influence on their breakdown strength. The first breakdown sites transferred to the boundary of Cu and Cr phase for CuCr25Ni compared to the Cr phase for CuCr25 without Ni.
CuCr25 alloys containing different Ni content were prepared by vacuum induction melting (VIM). The micro structure and properties were tested. The results show that with the increase of Ni content in CuCr25 alloys, the Cr phase changed from developed dendrite into nodular grains and was drastically refined; the electrical conductivity significantly decrease, but still reach the level of conventional CuCr50 when the Ni content is below 0.5%. The Ni content had little influence on their breakdown strength. The first breakdown sites transferred to the boundary of Cu and Cr phase for CuCr25Ni compared to the Cr phase for CuCr25 without Ni.
基金
We gratefully acknowledge the financial support from "863" program (Grant No.200lAA320714 and 715-005-0160)
the National Natural Science Foundation of China (Grant No.50071043 and 50271050). The authors also appreciate Prof. Y.X. Zhu, Z. Zheng and A.P.
