宝钢X70石油天然气管线钢的开发及在西气东输工程中的应用
被引量：1
摘要
本文简要介绍了宝钢开发研制的针状铁素体型x70管线钢,该钢种具有高的强度、高的低温冲击韧度、低的韧脆转转温度和优良的焊接性能,已成功地应用于西气东输管线工程中。
出处
《机械工人（热加工）》
2003年第5期34-35,共2页
Machinist Metal Forming
同被引文献15
-
1孔君华,吴力新,谢长生.热轧工艺对低碳微合金钢组织与性能的影响[J].热加工工艺,2004,33(11):43-44. 被引量：31
-
2Alan G. Pipeline design and construction using higher strength steels [A]. Processing of International Pipeline Conference[C]. Calgery:ASME1998,1998. 659.
-
3Zhao M C,Hanamura T,Qiu H,et al. Lath boundary thin-film martensite in acicular ferrite ultralow carbon pipeline steels[J]. Mater. Sci. Eng. ,2005,A395(1-2):327-332.
-
4Zhao M C,Tang B,Shan Y Y,et al. Role of microstructure on sulfide stress cracking of oil and gas pipeline steels [J]. Metall. Mater. Trans., 2003, A34(5) : 1089-1096.
-
5Zhao M C,Yang K,Xiao F R,et al. Continuous cooling transformation of undeformed and deformed low carbon pipeline steels [J]. Mater. Sci. Eng.,2003,A355 (1-2): 126-136.
-
6Z hao M C,Shan Y Y,Xiao F R,et al. Acicular ferrite formation during hot plate rolling for pipeline steels [J]. Mater. Sci. Technol., 2003,19(3): 355-359.
-
7Grange R A,Baughman R W. Hardness of Tempered. Martensite in Carbon and Low-Alloy Steels [J]. Trans. Am. Soc. Met., 1956,48:165-192.
-
8Zhao M C,Hanamura T,Qiu H,et al. Grain growth and Hall-Petch relation in dual-sized femte/cementite steel with nano-sized cementite particles in a heterogeneous and dense distribution[J]. Scripta Mater. ,2006,54(6): 1193-1197.
-
9Semiatin S L, Stutz D E, Byrer T G. Induction Tempering of Steel[J]. Journal of Heat Treating, 1985,4(1) :39-55.
-
10Zhao M C,Hanamura T,Qiu H,et al. Microstructural evolution of submicron sized ferrite in bimodal structural ultrafine grained ferrite/cementite steels by annealing below austenized temperature [J]. Metall. Mater. Trans. ,2006,A37 (5) : 1657-1664.
二级引证文献2
-
1王霞,张仁勇,杨大庆.热处理对X80管线钢CO_2腐蚀行为的影响[J].热加工工艺,2011,40(6):143-145. 被引量：8
-
2Jing Ma,Fan Feng,Bai-qing Yu,Hai-feng Chen,Li-feng Fan.Effect of cooling temperature on the microstructure and corrosion behavior of X80 pipeline steel[J].International Journal of Minerals,Metallurgy and Materials,2020,27(3):347-353. 被引量：7
-
1赵旭平,尹永晶,张勇.液压缸开裂失效分析[J].金属热处理,2005,30(10):86-88. 被引量：2
-
2Jang-yong Yoo,姜基凤,周雄龙,中国科学院金属研究所"973"规划G19980061511超级管线钢课题组.X70针状铁素体管线钢的优点暨恶劣环境下油气输送管道工业的发展[J].焊管,2004,27(2):1-11. 被引量：8
-
3冯耀荣,柴惠芬,郭生武,霍春勇,刘迎来,李鹤林,金志浩.低碳超低碳微合金化管线钢显微组织的研究进展[J].材料导报,2002,16(6):9-12. 被引量：12
-
4水涵.新疆将成为——全国最大天然气外输省区[J].特种结构,2008,25(3):112-112.
-
5池强,刘迎来,高广林,马明来.X70钢螺旋焊缝冷弯管的质量评价[J].理化检验（物理分册）,2009,45(4):195-198. 被引量：6
-
6胡荣生,李启堂,刘开源.石油钻杆焊缝喷雾热处理[J].金属热处理,1999,24(10):16-18. 被引量：3
-
7赵新学,张庆生,王木乐,赵斌,郭伟成,刘洁.抗硫膨胀管力学性能及膨胀动力性能研究[J].石油机械,2014,42(12):57-60. 被引量：3
-
8陈广辉.低温顶部驱动钻井装置主承载件材料的选择[J].化学工程与装备,2013(7):93-95.
-
9孙杰,王学国,郭彬,刘荣哲,任茬.西气东输管线工程防腐补口、补伤施工技术[J].防腐保温技术,2004,12(4):20-22. 被引量：1
-
10楼晨阳,姚晓,何德清,于三跃,韩远远,张鹏伟.钙质晶须在高温加砂水泥中的增强性能研究[J].石油钻探技术,2015,43(4):91-95. 被引量：4
