期刊文献+

Fabrication of anatase titanium dioxide nanotubes by electroless deposition using polycarbonate for separate casting method 被引量:1

Fabrication of anatase titanium dioxide nanotubes by electroless deposition using polycarbonate for separate casting method
下载PDF
导出
摘要 Titanium dioxide nanotubes(TNTs)were prepared by electroless deposition using ion track etched polycarbonate templates.The ion tracks were prepared to the desired diameter of the TNTs outer diameter.Titanium dioxide nanotubes with a diameter of minimum 80 nm having a wall thickness of minimum 10 nm can be fabricated using this method.To achieve nanotubes with thin walls and small surface roughness the tubes were generated by a several steps procedure under aqueous conditions at nearly room temperature.The presented approach will process open end nanotubes with well defined outer diameter and wall thickness.Using this method TNT arrays up to 109 tubes per cm2having a tube length up to 30μm can be produced,single tubes are also possible.The structural properties of the grown TNTs were investigated by using various analytical techniques,i.e.scanning electron microscopy(SEM),energy dispersive X-ray fluoresence spectrometer(EDX),X-ray photoelectron spectroscopy(XPS),X-ray diffraction(XRD),Raman spectroscopy and Photoluminescence. Titanium dioxide nanotubes(TNTs) were prepared by electroless deposition using ion track etched polycarbonate templates. The ion tracks were prepared to the desired diameter of the TNTs outer diameter. Titanium dioxide nanotubes with a diameter of minimum 80 nm having a wall thickness of minimum 10 nm can be fabricated using this method. To achieve nanotubes with thin walls and small surface roughness the tubes were generated by a several steps procedure under aqueous conditions at nearly room temperature. The presented approach will process open end nanotubes with well defined outer diameter and wall thickness. Using this method TNT arrays up to 109 tubes per cm2 having a tube length up to 30 μm can be produced, single tubes are also possible. The structural properties of the grown TNTs were investigated by using various analytical techniques, i.e. scanning electron microscopy(SEM), energy dispersive X-ray fluoresence spectrometer(EDX), X-ray photoelectron spectroscopy(XPS), X-ray diffraction(XRD), Raman spectroscopy and Photoluminescence.
出处 《Nano-Micro Letters》 SCIE EI CAS 2010年第1期26-30,共5页 纳微快报(英文版)
关键词 Electroless deposition Ion track template NANOTUBES Titanium dioxide ANATASE Electroless deposition Ion track template Nanotubes Titanium dioxide Anatase
  • 相关文献

参考文献1

二级参考文献4

共引文献6

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部