期刊文献+

螺杆-导流筒搅拌器的循环和功率特性 被引量:3

CIRCULATION AND POWER CONSUMPTION PERFORMANCE FOR HELICAL SCREW IMPELLER WITH DRAUGHT TUBE
下载PDF
导出
摘要 测定了19种不同几何尺寸的螺杆-导流筒搅拌器层流域的轴向循环流量、功率消耗和Metzner常数K_(?).通过对螺杆挤出机的动力学分析结果进行实验修正,得到了半经验的无因次循环流量C_1、功率数K_(?)以及K_(?)的计算式.实验发现流体的弹性显著地抑制轴向循环流动,与牛顿流体相比,弹性流体的C_1有所降低. The axial circulation, power consumption and Metzner constant Kswere measured for 19 types of helical screw impellers with a draught tube in the laminar regime. On the basis of an analogy between this mixer and a screw extruder, the semi-theoretical correlations of the circulation number Ci, power consumption Kp and Metzner constant Ks were obtained. The influence of elasticity on circulation number Ci was also studied. The elasticity seemed to dampen the axial circulation and the circulation number Ci of viscoelastic fluids was lower than that of Newtonian fluids.
出处 《化工学报》 EI CAS CSCD 北大核心 1992年第3期275-282,共8页 CIESC Journal
基金 国家自然科学基金资助项目
关键词 搅拌器 粘弹性流体 功率 循环 power consumption, circulation performance mixer, viscoelastic fluids
  • 相关文献

参考文献3

  • 1赵得禄,聚合物加工基础,1984年
  • 2夏廷文,塑化挤出工程原理,1984年
  • 3丁浩,塑料加工基础,1981年

同被引文献21

  • 1史子瑾,石正金,童克锦.苯乙烯聚合动力学(Ⅰ)热引发聚合机理的研究[J].化学反应工程与工艺,1993,9(3):274-278. 被引量:4
  • 2史子瑾,石正金,童克锦.苯乙烯聚合动力学——(Ⅱ)热引发本体聚合动力学模型[J].化学反应工程与工艺,1993,9(4):367-371. 被引量:5
  • 3马继舜,混合原理与应用,1984年
  • 4XIE Fang-ning (谢芳宁). Modeling and Simulation for Bulk Polymerization Process of Styrene (苯乙烯本体聚合过程模型化及计算机仿真) [D]. Hangzhou (杭州): Zhejiang University (浙江大学), 1996.
  • 5SHI Shu-jun (时书军). Process Simulation of High Impact Polystyrene Polymerization (高抗冲聚苯乙烯聚合过程的模拟) [D]. Hangzhou (杭州): Zhejiang University (浙江大学), 2000.
  • 6Flory P J. The mechanism of vinyl polymerizations [J]. J Am Chem Soc, 1937, 59 (Feb): 241-251.
  • 7Mayo F R. Chain transfer in polymerization of styrene: Ⅷ.Chain transfer with bromobenzene and mechanism of thermal initiation [J]. J Am Chem Soc, 1953, 75: 6133-6141.
  • 8PAN Zhu-ren (潘祖仁), SUN Jing-wu (孙经武). Polymer Chemistry (高分子化学)[M]. Beijing (北京): Chemical Industry Press (化学工业出版社), 1980.
  • 9Pryor W A, Lasswell L D. Mechanism of the initiation step in the self-initiated "thermal" polymerization of vinyl-monomers [J]. Am Chem Soc, Div Polym Prepr, 1970, 11(2): 713-726.
  • 10ZHU Xiu-ling (朱秀林). Mixing of High Viscous Inelastic and Elastic Liquids in Stirred Tank (搅拌槽中高粘非弹性何弹性流体的混合) [D]. Hangzhou (杭州): Zhejiang University (浙江大学), 1987.

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部