期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

铝装饰板亮斑产生的原因及其预防措施 被引量：2

The Cause and Preventable Measurement of Sparkling Spot on Aluminium Decorative Laminate
下载PDF
导出
摘要 分析1200铝合金装饰带材冷轧时亮斑形成的原因。通过试验及生产跟踪分析,制订了预防亮斑缺陷的措施,实施了产品质量控制手段和相应的检查方法,使装饰带材的质量和成品率都有较大的提高。 The sparkling spot formation process and cause of1200aluminium alloy decorative laminate during rolling was researched through running after the manufacture and many experiments.However,the measurements of improving this kind of disfigurement and controlling the quality of products were botained.The quality and the ratio of the decorative laminate were improved greatly.
作者 覃业霞 沈丽 韩鸣华
机构地区 上海交通大学金属基复合材料国家重点实验室 美铝(上海)铝业有限公司
出处 《轻合金加工技术》 CAS 2003年第6期21-23,共3页 Light Alloy Fabrication Technology
关键词 铝装饰板 亮斑 质量控制 成品率 夹杂 预防措施 aluminium decorative laminate sparkling spot brittle inclusion particles
分类号 TG335.12 [金属学及工艺—金属压力加工]
  • 相关文献

参考文献2

  • 1何文.铝合金装饰板渐露头角[J].企业技术开发,1995,(5):20-20.
  • 2王祝堂 田荣璋.铝舍金及其加工手册[M].长沙：中南工业大学出版社,1988..

同被引文献19

  • 1林浩.铝铸轧板的组织与性能(1)[J].轻金属,1989(1):52-57. 被引量：6
  • 2EIZADJOU M, DANESH MANESH H, JANGHORBAN K. Investigation of roll bonding between aluminum alloy strips [J]. Materials & Design, 2008, 29(4): 909-913.
  • 3TILLOUS K, TOLL-DUCHANOY T, BAUER-GROSSE E, HERJCHER L, GEANDIER G. Microstructure and phase composition of microarc oxidation surface layers formed on aluminium and its alloys 2214-T6 and 7050-T74 [J]. Surface & Coatings Technology, 2009, 203(19): 2969-2973.
  • 4KELES O, DUNDAR M. Aluminum foil: Its typical quality problems and their causes [J]. Journal of Materials Processing Technology, 2007,186(1-3): 125-137.
  • 5ZHU Y Z, HUANG R Y, ZHU Z, XIANG Z D. Comparative study on effects of microstructures of hot rolled and twin roll casting 1235 aluminium alloy on surface quality of aluminium foils produced [J]. Materials Science and Technology, 2011, 27(4): 761-766.
  • 6DAS S, LIM N S, KIM H W, PARK C G. Effect of rolling speed on microstructure and age-hardening behaviour of AI-Mg-Si alloy produced by twin roll casting process [J]. Materials & Design, 2011, 32(8-9): 4603-4607.
  • 7DAS S, LIM N S, SEOL J B, KIM H W, PARK C G. Effect of the rolling speed on microstructural and mechanical properties of aluminum-magnesium alloys prepared by twin roll casting [J]. Materials & Design, 20 I 0, 31 (3): 1633-1638.
  • 8SANDERS R E. Technology innovation in aluminum products [J]. JOM, 2001, 53(2): 21-25.
  • 9SHABEL B S, BAUMANN S F, SANDERS R E. Method of making aluminum foil or fin shock alloy product: US, 4737198 [P]. 1988-04-12.
  • 10BIROL Y. The performance of AI-Ti-C grain refiners in twin-roll casting of aluminium foilstock [J]. Journal of Alloys and Compounds, 2007,430(1-2): 179-187.

引证文献2

二级引证文献4

轻合金加工技术
2003年 第6期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部