期刊文献+

POE在塑料改性中的应用进展 被引量:5

PROGRESS IN THE APPLICATION OF POE IN THE MODIFICATION OF PLASTICS
下载PDF
导出
摘要 综述近几年聚烯烃弹性体(POE)与通用塑料、工程塑料共混改性的进展。与改性剂(乙烯/丙烯/二烯)共聚物和(苯乙烯/乙烯-丁烯/苯乙烯)共聚物相比,POE和功能化的POE作为一种新型改性剂能在较低含量下实现材料的脆-韧转变,减少了因加入弹性体造成的材料强度和模量的损失。 The progress in the modification of general-purpose plastics and engineering plastics, with POE as modifier, is reviewed. As a kind of novel modifier, compared with EPDM and SEBS modifiers, the brittle-ductile transition of materials can be achieved in the lower content of POE and the functionalized POE,and the loss of strength and modulus caused by the addition of the elastomer can be decreased.
出处 《工程塑料应用》 CAS CSCD 北大核心 2003年第6期67-69,共3页 Engineering Plastics Application
关键词 POE 塑料改性 应用进展 聚烯烃弹性体 通用塑料 工程塑料 POE, general-purpose plastics, engineering plastics, modification
  • 相关文献

参考文献25

二级参考文献59

  • 1杜婷婷.快插接头在气制动系统中的应用[J].电子工业专用设备,2006,35(4):59-61. 被引量:6
  • 2张增民 吕荣侠(等).-[J].塑料工业,1989,1:31-31.
  • 3曹福志.-[J].佤成树脂及塑料,1991,(2):13-13.
  • 4尼尔生L E.高分子和复合材料的力学性能[M].北京:轻工业出版社,1981.300.
  • 5丁洁.塑料应用技术[M].北京:化学工业出版社,1994..
  • 6Hammer C O,Maurer F H J,Molnar S,et al.Journal of Material Science,1999,34: 5911-5918.
  • 7Long Y,Shanks R A.Journal of Applied Polymer Science,1999,61: 1877-1885.
  • 8Hornsby P R,Premphet K.Journal of Applied Polymer Science,1998,70: 587~597.
  • 9Jancar J,Dibenedetto A T.Journal of Material Science,1994,29: 4651~4658.
  • 10Wang K,Wu J S,Kim J K,et al.Proceeding of the International Workshop on Fracture and Failure of Composites.

共引文献249

同被引文献22

  • 1沈岳新,谢邦互,龚关,郑爱舞,李忠明,杨伟,杨鸣波.PP/POE共混物的形态和性能的研究[J].塑料工业,2005,33(2):39-41. 被引量:20
  • 2郭文宇,彭波.茂金属聚烯烃弹性体应用研究进展[J].塑料科技,2007,35(1):78-81. 被引量:6
  • 3张敏敏,鲁圣军,何敏,张天水,于杰,陈兴江.相对分子质量及其分布对成核聚丙烯性能的影响[J].中国塑料,2007,21(3):30-34. 被引量:9
  • 4FERRER B D, MASPOCH M L, MARTINEZ A B. Influence of annealing on the microstructural, tensile and fracture properties of polypropylene films[J]. Polymer, 2001, 42: 2665-2674.
  • 5MASPOCH M L, GAMEZ PEREZ J , GORDILLO A. Characterisation of injected EPBC plaques using the essential work of fracture method[J]. Polymer, 2002, 43: 4177-4183.
  • 6EVERAERT V, AERTS L, GROENINCKX G. Phase morphology development in immiscible PP/(PS/PPE) blends influenoe of the melt-viscosity ratio and blend composition[J]. Polymer, 1999, 42: 6627-6644.
  • 7JAFARI S H, POTSCHKE P. Multicomponent blends based on polyamide 6 and styrenie polymers: morphology and melt rheology [J]. Polymer, 2002, 43: 6985-6992.
  • 8OSHINSKI A J, KESKKULA H, PAUL D R. The role of matrix rnoleeular weight in rubber toughened nylon 6 blends: 2. room temperature Izod impact toughness[J]. Polymer, 1996, 37: 4891- 4907.
  • 9Van Krevelen D W,Nijenhuis K Te. Properties of Polymers: Their Correlation with Chemical Structure: Their Numerical Estimation and Prediction from Additive Group Contributions [M]. New York: Elsevier Scientific, 1976.
  • 10Avramova N. Amorphous Poly(Ethylene Terephthalate)/Po- ly(Butylenes Terephthalate) Blends: Miscibility and Proper- ties[J]. Polymer, 1995,36(4) :801-808.

引证文献5

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部