期刊文献+

裂纹扩展阻力K_R曲线与试样厚度关系研究 被引量:3

RESEARCH ON THE RELATION BETWEEN K_R-CURVE OF CRACK EXTENSION RESISTANCE AND SAMPLE THICKNESS
下载PDF
导出
摘要 在提供的裂纹扩展理论阻力曲线的基础上,给出了阻力曲线与试样厚度关系的数学表达式。利用少量试验结果,根据最小二乘方法即可确定表达式中的参量。这一数学表达式得到了试验结果的验证,并可补充现有手册中试验数据之不足。 A mathematical formula for the relation between resistance curve of crack extension and sample thickness is obtained in fracture mechanics, which is based on the theoretical resistance curve of crack extension provided in a previous work. Some parameters in the formula are made certain in the least square method by using a few of test results. Finally, the mathematical expression is verified by adopting some test results and it will supplement data to the current handbook which has been short of test data.
作者 杨继运 张行
出处 《机械工程学报》 EI CAS CSCD 北大核心 2003年第6期49-52,共4页 Journal of Mechanical Engineering
基金 教育部博士点基金资助项目(1999000607)
关键词 裂纹扩展 阻力曲线 试样厚度 最小二乘法 断裂力学 Crack growth Resistance curve Sample thickness
  • 相关文献

参考文献6

  • 1杨继运,张行.材料断裂韧度与试样厚度关系研究[J].机械强度,2003,25(1):76-80. 被引量:30
  • 2吴学仁.飞机结构金属材料力学性能手册(第二卷)[M].北京:航空工业出版社,1996..
  • 3Broek D. Artificial slow crack growth under constant stress- the R curve concept in plane stress. Engineering Fracture Mechanics, 1973 (5): 45-53.
  • 4Yan Cheng, Mai Yiuwing. Numerical investigation on stable crack growth in plane stress. International Journal of Fracture, 1998, 91. 117-130.
  • 5Fett T, Munz D, Geraghty R D, et al. Influence of specimen geometry and relative crack size on the R-curve. Engineering Fracture Mechanics, 2000, 66: 375-386.
  • 6Zhao J, Zhang X. On the process zone of a quasi-static growing tensile crack with power-law elastic-plastic damage. International Journal of Fracture, 2001, 108: 383-395.

二级参考文献6

  • 1[1]Timofeev B T, Blumin A A, Anikovsky ⅤⅤ. Fracture toughness of low carbon steels and their weldments. Int. J. of Pressure Vessels and Piping, 1998, 75: 945 ~ 950.
  • 2[2]Putatunda Susil K. Fracture toughness of high carbon and high silicon steel. Materials Science and Engineering, 2001, A297:31 ~ 43.
  • 3[3]Tahtinen S, Laukkanen A, Singh B N. Damage mechanisms and fracture toughness of GlidCop(R) CuAl25 IGO copper alloy. J. of Nuclear Materials, 2000, 283~287:1028~1032.
  • 4[4]Nagal G, Blauel J G. Evaluation of the standard master curve for fracture toughness determination. Nuclear Engineering and Design, 1999, 190:159~169.
  • 5[5]Lambrigger M. Master curve for brittle cleavage fracture toughness testing. Engineering Fracture Mechanics, 1996, 55(4):677~678.
  • 6[6]Liebowitz H. Fracture. Vol. Ⅱ, New York: Academic Press, 1968.

共引文献29

同被引文献22

  • 1孟庆良,夏源明.弹塑性材料裂纹扩展的动态J阻力曲线实验研究简介[J].机械强度,2004,26(z1):172-176. 被引量:3
  • 2时培林,王伟,唐余勇.球面铣刀制造中的数学模型研究[J].机械工程学报,1994,30(5):55-60. 被引量:17
  • 3VAMERALI T, BERTOCCO M. SARTORI/Effects of a new wide-sweep opener for no-till planter on seed zone properties and root establishment in maize: A comparison with double-disk opener [J]. Soil & Tillage Research, 2006, 89: 196-209.
  • 4DAMORA D, PANDEY K P. Evaluation of performance of furrow openers of combined seed and fertilizer drills [J]. Soil andTillage Research, 1995, 34(1): 127-139.
  • 5TESSIER S, SAXTON K E, PAPENDICK R I, et al. Zero tillage furrow opener effects on seed environment and wheat emergence [J]. Soil and Tillage Research. 1991, 21: 347-360.
  • 6HE Jin, LI Hongwen. WANG Xiaoyan, et al. The adoption of annual subsoiling as conservation tillage in dryland maize and wheat cultivation in northern China[J]. Soil and Tillage Research, 2007, 94(2): 493-502.
  • 7Broek D. Elementary engineering fracture mechanics. Leyden: Noordhoff international publishing, 1974:122-124.
  • 8Yang W, Grace W R, Shah S P. A geometry and size dependent frac- ture resistance curve. International Journal of Fracture, 2001 ; 109 (3) : L23-L28.
  • 9Fett T, Munz D, Geraghty R D, et al. Influence of specimen geome- try and relative crack size on the R-curve. Engineering Fracture Me- chanics, 2000; 66(4) :375-386.
  • 10Neimitz A. The jump-like crack growth model, the estimation of frac- ture energy and J(R) curve. Engineering Fracture Mechanics, 2008; 75 ( 2 ) : 236-252.

引证文献3

二级引证文献45

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部