摘要
从实验角度分析了半钢轧辊表面经过激光相变硬化处理后的性能改善情况,着重讨论了改变工艺参数对激光淬火效果的影响.利用数值模拟的分析手段对轧辊在激光辐照之下经历的热循环过程作了详细描述,说明了辊面激光淬火的原理,对光斑附近区域的温度梯度分布作了分析,初步探讨了激光淬火裂纹形成的原因.
The property improvement of the semi-steel roll surface after laser quenching was investigated experimentally, and the effect of technological parameters on laser quenching was analyzed. The thermal circulating procedure of the surface under the laser beam was elaborated by numerical simulation methods and the principle of laser quenching on the surface is explained consequently. The distribution of thermal gradient near the laser spot was obtained, and the reason for crack formation during laser beam scanning was discussed.
出处
《北京科技大学学报》
EI
CAS
CSCD
北大核心
2003年第3期258-261,共4页
Journal of University of Science and Technology Beijing