摘要
采用几何方法分析理想状态下 2 0 2 4/30 0 3双层梯度铝合金圆锭自由压制变形过程 ,总结出材料废料率和理想板宽同压制比、内、外合金分界圆半径的关系。实验结果与几何解析结果对比是比较吻合的。
The deformation process of 2024/3003 two-layered gradient ingot was analyzed by geometry method.The relations between the unqualified materials ratio or ideal board width and press ratio or dividing circle radius were summarized.Experimental and calculated results were compared.Results showed that the calculated results are in good agreement with those of experimental.
出处
《现代制造工程》
CSCD
北大核心
2003年第6期7-10,共4页
Modern Manufacturing Engineering
基金
国家自然科学基金资助项目 (5990 50 0 7)
广东省自然科学基金资助项目 (9942 50 )
