期刊文献+

裂纹转子过亚临界转速瞬态响应特性 被引量:3

Research on Transient Response Characteristics of a Cracked Rotor Passage through Subcritical Speed
下载PDF
导出
摘要 基于建立的裂纹转子瞬态响应动力学模型 ,得到了有无裂纹转子的数值仿真解 .分析了裂纹转子的亚谐波共振特性 ;研究了刚度变化、质量偏心以及质量偏心角对裂纹转子瞬态响应的影响 .将小波分析方法引入到裂纹转子时频特性研究中 ,得到了有无裂纹转子的小波时频特性 。 The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained. The subharmonic resonance of the cracked rotor was analyzed. The influence of the stiffness variation, the unbalance and the inhabiting angle on the transient response was investigated. The wavelet analysis algorithm was introduced for the research on the time-frequency feature of the cracked rotor. The wavelet time-frequency features of the cracked rotor and the uncracked rotor were discussed, and the difference between them was presented.
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2003年第7期1106-1109,共4页 Journal of Shanghai Jiaotong University
基金 国家重点基础研究规划 (973 )项目(G19980 2 0 3 2 1) 国家自然科学基金资助项目 (10 1760 14 )
关键词 裂纹转子 亚临界转速 瞬态响应 亚谐波共振 小波时频特性 Computer simulation Dynamic response Numerical analysis Stiffness Transients Wavelet transforms
  • 相关文献

参考文献9

  • 1蒲亚鹏,陈进,邹剑,钟平.裂纹转子振动的非线性特性分析[J].上海交通大学学报,2002,36(6):849-852. 被引量:1
  • 2Wauer J. On the dynamics of cracked rotors: a literature survey [J]. Applied Mechanics Review, 1990,43(1):13--17.
  • 3Gasch R. Dynamic behavior of a simple rotor with cross-sectional crack [A]. I Mech E Conference Publication: Vibrations in Rotating Machinery [C].London: Professional Engineering Publishing Limited, 1976. 123--128.
  • 4Gasch R. A survey of the dynamic behavior of a simple rotating shaft with a transverse crack [J]. J Sound and Vibration, 1993,160(2) : 313-- 332.
  • 5Sekhar A S, Prabhaker B S. Condition monitoring of cracked rotors through transient response [J]. Mech Math Theory,1998,33(8) :1167--1175.
  • 6Sekhar A S, Prabhakar B S. Transient analysis of a cracked rotor passing through critical speed [J]. J Sound and Vibration, 1994,173(3) :415 --421.
  • 7Prabhakar S Sekhar A S, Mohanty A R. Detection and monitoring of cracks in a rotor-bearing system using wavelet transforms [J]. Mechanical Systems and Signal Processing,2001,15(2) :447--450.
  • 8Zou J, Chen J, Geng Z M. Application of wavelet packets algorithm to diesel engines' vibroacoustic signature extraction [J]. Journal of Automobile Engineering, 2001,215 (D9) : 987 -- 993.
  • 9Zou J, Chen J, Pu Y P. On the wavelet time-fre-quency analysis algorithm in identification of a cracked rotor[J]. Journal of Strain Analysis for Engineering Design, 2002,37 (3) : 239 -- 246.

二级参考文献2

同被引文献31

  • 1林富生,孟光.重力对具有初弯和不对称刚度机动转子特性的影响[J].机械强度,2002,24(3):320-326. 被引量:5
  • 2郑水波,韩正之,唐厚君,张勇.最小二乘支持向量机在汽车动态系统辨识中的应用[J].上海交通大学学报,2005,39(3):392-395. 被引量:21
  • 3何成兵,顾煜炯,杨昆.裂纹转子弯扭耦合振动瞬态分析[J].振动.测试与诊断,2006,26(3):226-230. 被引量:8
  • 4Vapnik V N 张学工.统计学习理论的本质[M].北京:清华大学出版社,2000..
  • 5John S T,Nello C.模式分析的核方法[M].赵玲玲,苏明,曾华军,译.北京:机械工业出版社,2006:126-163.
  • 6Lee J. Measurement of machine performance degradation using a neural network model [J]. Computers in Industry, 1996, 30(2): 193-209.
  • 7Yan J, Lee J. Degradation assessment and fault modes classification using logistic regression [J]. Journal of Manufacturing Science and Engineering, 2005, 127(4): 912-914.
  • 8Casoetto N, Djurdjanovic D, Mayor R, et al. Multisensor process performance assessment through the use of autoregressive modeling and feature maps[J].SME Journal Manufacturing Systems, 2003, 22 ( 1 ): 64-72.
  • 9Qiu H, l.iao H, Lee J. Degradation assessment for machinery prognostics using Hidden Markov Models [C]//Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference-DETC2005. New York:ASME,2005, 1(A): 531-537.
  • 10Bernardete R. Support vector machine for quality monitoring in a plastic injection molding process [J]. IEEE Trans on System, Man, and Cybernetics-Part C, 2005, 35(3): 401-410.

引证文献3

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部