2Conrad H. Eleetroplasticity in metals and ceramics [ J ] Science and Engineering: A, 2000, 287(2) : 276-287.
3Paul S H, Thomas K. Electmmigration in metals [ J ]. Progress in Physics, 1989, 52: 301-348.
4Materials Repots on Conrad H. Effects of electric current on solid state phase transformations in metals[J]. Materials Science and Engineering: A, 2000, 287(2): 227-237.
5Hiroshi, Ting H, Hisanori T. Low temperature crystallization of amorphous alloys under electropulsing[ J]. Journal of Non-Crystalline Solids, 2002, 312-314 : 581-584.
6Lina H Q, Zhao Y G, Zhao B, et al. Formation and thermal fatigue properties of fine-grained heat affected zone on cast-hot-working-die steel after electropulsing stimulation with high current density [ J ]. ISIJ International, 2008, 48( 11 ) : 1647-1653.
7Zhao Y G, Ma B D, Guo H C, et al. Electropulsing strengthened 2GPa boron steal with good ductility [ J]. Materials and Design, 2013, 43: 195-199.
8Zhang W, Sui M L, Zhou Y Z, et al. Evolution of mierostruetures in materials induced by electropulsing [ J ]. Micron, 2003, 34 ( 3/5 ) : 189-198.
9Liu W B, Wen Y H, Li N, et al. Further improvement of shape memory effect in a pre-deformed Fe-Mn-Si-Cr-Ni-Nb-C alloy by smaller NbC precipitated through electropulsing treatment [ J ]. Journal of Alloys and Compounds, 2009, 472(1/2) : 591-594.
10Lin H Q, Zhao Y G, Zhao Y, et al. Effect of pulse electric current stimulation on the microstructure, mechanical properties and thermal fatigue behavior of cast-hot-working die steel [ J ]. ISIJ International, 2008, 48(2) : 212-217.
