摘要
分析了波形板气水分离器内二次液滴携带现象的机理 ,得出波形板内二次液滴主要来源于气流剪切液膜和液滴撞击液膜的结论 .基于此建立了考虑二次携带现象的新的碰壁模型 .新模型可以求出反弹后液滴的速度、液滴碰壁飞溅后所产生的二次液滴群的直径、数目、速度和角度 .
The mechanism of secondary droplets in the steam water with wave shape vanes was analyzed. It is concluded that the secondary droplets mainly come from shearing of airflow and impinging of droplets on film. The new impinging model was founded based on the mechanism of secondary droplets. According to the new model, the velocity of droplet from incident droplet′s rebounding from the film was known, and diameter, number, velocity and angle of droplet groups from incident droplet′s impinging were obtained.
出处
《华中科技大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2003年第8期41-43,共3页
Journal of Huazhong University of Science and Technology(Natural Science Edition)
基金
国家重点基础研究发展规划资助项目 (G2 0 0 0 0 2 6 30 3)
中国核动力研究设计院空泡物理和自然循环重点实验室基金资助项目
关键词
二次携带
波形板
模型
气水分离
secondary droplets
wave shape vane
model
steam water separator
