摘要
Experimental technique has been inadequate to anodic overvoltage measurements in aluminum electrolysis. To determine its ohmic/voltage drop precisely, a current interruption technique was modified with a high frequency digital oscilloscope, current interrupters with fast switching time, an improved cell configuration and a simulation applied to the oscillating potential decay curve. The results show that the technique can give good reproducibility for overvoltage studies. A substantial increase of anodic overvoltage is observed with graphite powder addition, metallic aluminum addition and CO bubbling in the melts.
Experimental technique has been inadequate to anodic overvoltage measurements in aluminum electrolysis. To determine its ohmic/voltage drop precisely, a current interruption technique was modified with a high frequency digital oscilloscope, current interrupters with fast switching time, an improved cell configuration and a simulation applied to the oscillating potential decay curve. The results show that the technique can give good reproducibility for overvoltage studies. A substantial increase of anodic overvoltage is observed with graphite powder addition, metallic aluminum addition and CO bubbling in the melts.
出处
《中国有色金属学会会刊:英文版》
EI
CSCD
2003年第3期699-703,共5页
Transactions of Nonferrous Metals Society of China
基金
Project(G19990 64 90 3 )supportedbytheNationalKeyFundamentalResearchandDevelopmentProgramofChina