摘要
从表观质量、上锌量、电化学测试结果考察加入微量铝和钛对锌镀层的影响。结果表明 ,铝和钛最佳加入量分别为0 0 5 %以下和 0 0 3 % ,得到的镀层耐蚀性强 。
The effects of addition of Al and Ti on the hot dipped zinc coating are investigated by the analysis of the surface quality, the plating weight and the electrochemical property. The results show that the optimum dosage of Al and Ti are below 0.05% and 0.03% respectively, the coating produced in this condition are excellent in corrosion resistivity and surface quality.
出处
《有色金属》
CSCD
2003年第3期23-24,45,共3页
Nonferrous Metals
基金
国家自然科学基金资助项目 ( 5 98740 11)
关键词
镀层
电化学测试
铝
钛
表现质量
热镀锌层
material science foundation
plating
electrochemistry test
Al
Ti
surface quality
