期刊文献+

交联过程对交联发泡PP板材性能的影响 被引量:12

Influence of Crosslinking Procedure on Property of Foamed PP Board
下载PDF
导出
摘要 以过氧化二异丙苯 (DCP)为交联剂 ,二乙烯基苯为助交联剂 ,偶氮二甲酰胺为发泡剂 ,采用化学交联法 ,使PP树脂在发泡之前交联 ,并利用压制成型的方法制取了泡孔均匀、细密的泡沫板材。研究了交联剂和助交联剂的用量对凝胶质量分数和板材性能的影响。结果表明 :DCP和二乙烯基苯的质量分数分别为 0 12 %和 1 6%时 。 PP resin was crosslinked before blowing by chemical crosslinking method to pressing the foamed board with homogeneous and fine cells, in which DCP was used as crosslinking agent, DVB as assisted crosslinking agent and AC as blowing agent The influence of DCP content and DVB content on the mass fraction of gel and the property of the foamed board were studied The results showed when the mass fractions of DCP and DVB were 0 12% and 1 6% respectively, the property of the product was pretty good
出处 《塑料工业》 CAS CSCD 北大核心 2003年第7期43-45,共3页 China Plastics Industry
关键词 交联过程 交联发泡 PP 聚丙烯 板材 性能 Polypropylene Crosslinking Board Foaming
  • 相关文献

参考文献3

二级参考文献11

  • 1陈文瑛.塑料包装当前发展动向浅析与思考[J].中国塑料,1995,9(3):1-5. 被引量:1
  • 2关肇基.-[J].中国塑料,1997,5:1-1.
  • 3-.-[J].塑料市场,1996,(23):21-21.
  • 4黄震安樱.-[J].中国包装,1998,(3):44-44.
  • 5张玉霞.-[J].现代塑料加工应用,1996,(4):54-54.
  • 6-.-[J].塑料市场,1998,(25):14-14.
  • 7廖正品.-[J].中国塑料,1996,(6):1-1.
  • 8冯添鸿,北京化工大学学报,1998年,25卷,1期,27页
  • 9ChichengWang,J Vinyl Additive Technology,1996年,2卷,2期,167页
  • 10张玉霞.聚丙烯挤出发泡成型技术[J].现代塑料加工应用,1997,9(3):57-60. 被引量:5

共引文献38

同被引文献197

引证文献12

二级引证文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部