期刊文献+

热加工和热处理对YBa_2Cu_3O_(7-x)超导带材的相结构和氧的影响研究

Study of Hot-working and Heat Treatment Influence on Phase Structure and Oxygen Content in YBa_2Cu_3O_(7-x) Superconductor Strip
下载PDF
导出
摘要 本文论述了YBa_2Cu_3O_(7-x)超导带材热加工和热处理中相结构和氧的变化,热轧后的带材为正交相和四方相,在热处理加热时,超导带材首先吸氧,当加热到450℃时又失氧,在冷却过程中从900℃到450℃吸氧较快,450℃以后,吸氧逐渐平衡。高J_c的超导带中J_c与氧含量不呈线性关系,高J_c的带材经X射线分析二类应力较大。 The changes of phase structure and oxygen content in YBa_2Cu_3O_(7-x) superconductor strip during hot-working and heat treatment are discussed here.There are orthorhombie and tetragonal phases in the hot-working superconductor strip.Oxygen is absorbed into the strip during heat process and is lost at 450℃. Absorptivity of xygen becomes gradually fast from 950℃ to 450℃ during cooling process.The experimental results show that the high J_c supreconductor strip is not linear relation with oxygen content.It is observed by X-ray diffraction analyse that the internal stress in high J_c strip is greater than that in low J_c stuip.
出处 《昆明工学院学报》 1992年第3期37-40,共4页
关键词 超导体 热加工 热处理 YBACUO 高TC Superconductor Hot-working Heat treatment.
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部