期刊文献+

电弧炉冶炼工艺对钢液氮含量的影响 被引量:2

Effect of Arc Furnace Operation Technology on Nitrogen Content in Molten Steel
下载PDF
导出
摘要 根据现场试验结果 ,分析了南钢 1 0 0t电弧炉冶炼工艺对钢液氮含量的影响 ,结果表明 :对同一批废钢 ,随着铁水加入量的增加 ,出钢钢液氮含量下降 ; Based on the test results in situ, the effect of steelmaking technology of an 100 t arc furnace at Nanjing Iron and Steel on nitrogen content in molten steel has been analyzed. The test results showed that with same batch of scrap, the nitrogen content in tapping steel decreased with increasing hot metal charging amount, and the absorbing nitrogen amount of molten steel from atmosphere increased while the molten steel was deoxidized by adding Al during tapping.
出处 《特殊钢》 北大核心 2003年第4期51-52,共2页 Special Steel
关键词 冶炼工艺 钢液 氮含量 电弧炉炼钢 废钢 出钢 脱氧 铁水加入量 Arc Furnace, Steelmaking, Nitrogen Content
  • 相关文献

参考文献2

二级参考文献3

  • 1曹兆民(译),氧气转炉炼钢过程理论,1979年,267页
  • 2曹广畴.现代板坯连铸[M]冶金工业出版社,1994.
  • 3S. Ban-Ya,F. Ishii,Y. Iguchi,T. Nagasaka. Rate of nitrogen desorption from liquid iron-carbon and iron-chromium alloys with argon[J] 1988,Metallurgical Transactions B(1):233~242

共引文献23

同被引文献44

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部