期刊文献+

组织形态对TC4合金应力松弛的影响 被引量:3

Effect of Microstructure on Stress Relaxation Behavior of TC4 Alloy
下载PDF
导出
摘要 研究了组织形态对TC4钛合金应力松弛行为的影响。结果表明:200℃时等轴组织的抗应力松弛性能好于魏氏组织;400℃和600℃时魏氏组织的抗应力松弛性能稍高于等轴组织。不同组织的塑性应变速率-应力曲线具有相似的形状。等轴组织晶粒发生轻微的长大,魏氏组织在发生粗化的同时,条状物长径比减小,有球化的倾向。 The effect of microstructure on stress relaxation behavior was studied in this article. The result showed that the stress relaxation is more difficult in the equiaxed microstructure than in the widmanstatten structure at 200degreesC, but easier at 400degreesC and 600degreesC and the curves of plastic strain rate vs stress had the same shape for different structures. The equiaxed microstructure turned to be coarse and the length-to-width ratio of the streak of widmanstatten structure not only turned to be coarse, but also to be spheroidized during stress relaxation.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2003年第7期514-517,共4页 Rare Metal Materials and Engineering
关键词 TC4钛合金 组织形态 应力松弛 TC4 alloy structure stress relaxation
  • 相关文献

参考文献7

  • 1赵永庆.稀有金属材料与工程,2001,30(6):413-413.
  • 2Froes F H. Titanium Products and Applications[J]. Journal of Metals, 1994, (3): 12 — 14.
  • 3Chen Chunkui (陈春奎) et al. Hot Sizing in Titanium Workpieces and Titanium Alloy Workpieces[J]. Metal Science and Technology(金属科学与工艺), 1987, 4(2) :89 — 100.
  • 4Li Xin(李昕) et al. Elastic and Inelastic Measure and Usefulness(弹性与非弹性的测量和应用) [M]. Beijing: Metallurgy Press, 1999:288 — 289.
  • 5Ping Xiuer(平修二) . High Temperature Strength Theory Design in Metal (金属材料的高温强度理论设计) [M]. Beijing:Science Press, 1983:187 — 205.
  • 6Miler W H et al. Microstructure, Creep, and Tensile Deformation in Ti-6Al-2Nb-ITa-0. 8Mo[J] . Metall Trans, 1987,18A: 1 451 — 1 467.
  • 7王文生,阎蕴琪,李中奎.纤维增强TiAl基复合材料的研究[J].钛工业进展,2003(2):5-8. 被引量:48

二级参考文献4

共引文献47

同被引文献26

  • 1郝树本,崔树森.复杂形体钛合金叶片等温热校形工艺研究[J].材料工程,1996(4):40-43. 被引量:11
  • 2Gilbert J R B. Materials Science and Technology[J], 1985, 1:257.
  • 3陈春奎 etal.金属科学与工艺,1987,4(2):89-89.
  • 4冯端.金属力学性能[M].Beijing:Science Press,1999.564.
  • 5Paton N E, Backofen W A. Metall Trans[J], 1970, 1 : 2839.
  • 6Ponsonnet L, Quesne C, Penelle R. Materials Science and Engineering[J], 1999, A262:50.
  • 7BEN C Odegard, Anthony W. Metall Trans[J], 1974, 5:1207.
  • 8Coble R L. J Appl Phys[J], 1963, 34:1679.
  • 9Mohamed F A, Langdon T G. Acta Metal[J], 1974, 22:779.
  • 10Weetman J. JAppl Phys[J], 1963, 34:1679.

引证文献3

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部