期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

国外低轮廓UPR固化收缩控制研究发展动态 被引量：2

STUDY PROGRESS IN SHRINKAGE CONTROL OF LOW PROFILE UNSATURATED POLYESTER RESIN DURING CURE
下载PDF
导出
摘要 本文详细介绍了国外低轮廓UPR固化收缩控制研究发展动态 ,概述了国外在这一研究领域中涉及的主要研究内容、实验方法和影响因素 。 In this paper the study progress in the shrinkage control of low profile unsaturated polyester resins during cure is introduced in detail, including the corresponding research contents, experimental methods and influence factors. Furthermore, some shrinkage control mechanisms of low profile unsaturated polyester resin are also presented.
作者 王侃 王继辉 薛忠民 陈淳
机构地区 武汉理工大学 北京玻璃钢研究设计院
出处 《玻璃钢／复合材料》 CAS CSCD 2003年第4期34-37,共4页 Fiber Reinforced Plastics/Composites
基金 国家 8 63项目资助 (2 0 0 1AA3 3 5 0 2 0 )
关键词 国外 低轮廓UPR 固化 收缩控制 研究 不饱和聚酯树脂 低轮廓添加剂 shrinkage control unsaturated polyester resin low profile additive
分类号 TQ323.42 [化学工程—合成树脂塑料工业]
  • 相关文献

参考文献18

  • 1Barkus E. J and Kroekel C. H. Appl. Folym. Sym. Journal of Applied Polymer Science. , 1970,15,113.
  • 2K. E. Atlns, D. R. Paul and S. Newman. Polymer Blends, Volume 2. Ed Academic Press, 1978.
  • 3M. J. Doyle and L.J. Gardner. 38th Annual Conferenoe,Reinforced Plastics Composite Institute, 1983:Seseon 19 - G.
  • 4V. A. Pattison. R. R. Hindersin and W. S. Schwartz. Journal of Applied Polymer Science, 1975(19) :3045.
  • 5Rhom and Haas.Belgium Patent 740581,1970.
  • 6Frank Fekete. Thickeners and low - shrink additives for Premix and SMC systems. SPI section 6 - D, 1970.
  • 7Divad T. Espenshade and John R. Lowry. low shrink Polyester Resin for Sheet Molding Compound. SPI section 12- F, 1971.
  • 8Kinkelaar, M.R, Wang,B. and Lee,L.,l. Polymer, 1994,35(14):3011.
  • 9Kinkelaar, M. R, PH D. Thesis. The Ohio State University, 1994.
  • 10Kinkelaar, M. R, Wang, B. and Lee, L.J. Appl. Polym. Sci.1992,45.

同被引文献22

  • 1来育梅,王伟,王晓东,黄培.热塑性聚酰亚胺的热膨胀系数研究[J].塑料工业,2005,33(10):41-43. 被引量：6
  • 2孙志杰,薛忠民,杨博,张佐光.LPA对UPR收缩率和力学性能的影响[J].北京航空航天大学学报,2005,31(10):1096-1100. 被引量：7
  • 3燕小然,汪张兴,高金涣,陆昶.SMC/BMC用低收缩添加剂的研究进展[J].绝缘材料,2007,40(3):18-21. 被引量：3
  • 4Atikins K E, Rex G C. The low profile effect:morphology and internal pigmentation [J]. Part-II, SPI Session 6-C, 1993.
  • 5Li W, Lee L J. Low temperature cure of unsaturated polyester resins with thermoplastic additives I dilatometry and morphology study [J]. Polymer, 2000, 41(2):685～696.
  • 6Wang Kan. The effect of low profile additives on unsaturated polyester resins during curing at low/medium temperature:shrinkage behavior study [J]. Key Engineering Materials, 2003,(249):351～354.
  • 7Suspene Laurent, Fourquier Dominique, Yang YeongShow. Application of phase diagrams in the curing of unsaturated polyester resins with low-profile additives [J]. Polymer, 1991,32(9):1593～1604.
  • 8Huang Yanjyi. Effects of poly(vinyl acetate) and poly(methyl methacrylate) low-profile additives on the curing of unsaturated polyester resins II. Morphological changes during cure[J]. Journal of Applied Polymer Science, 1995, 55(1):323～342.
  • 9Li W, Lee L J. Low temperature cure of unsaturated polyester resins with thermoplastic additives III. Modification of polyvinyl acetate for better shrinkage control [J]. Polymer, 2000,41:711～717.
  • 10Li W, Lee L J. Low temperature cure of unsaturated polyester resins with thermoplastic additives II. Structure formation and shrinkage control mechanism [J]. Polymer, 2000,41:697～710.

引证文献2

二级引证文献8

玻璃钢／复合材料
2003年 第4期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部