期刊文献+

STUDY ON THE DETERMINATION OF TRACE BISMUTH(III) BY THIN-LAYER RESIN PHASE SPECTROPHOTOMETRY

STUDY ON THE DETERMINATION OF TRACE BISMUTH(III) BY THIN-LAYER RESIN PHASE SPECTROPHOTOMETRY
下载PDF
导出
摘要 In this paper, a new thin-layer ion-exchange resin phase analytical method is introduced. It is based on that, the bismuthous cation can associate with iodic anions, so as to formed an anion complex [BiI4-] in a strong acidic environments. This anion complex can also exchanges with a weaker anions on the surface active site of anion exchange resin, so that a [R+] [BiI4-] solid phase binary associational system is produced. Owing to the solid system is a great many dispersive particulates, it can be pressed to a thin-layer by press tools of the so called 搕hin-layer resin phase?or 搑esin phase? and using this solid association system spectrophotometry for the determination of trace metals. So it can increase the analytical sensitivity. This association system exhibits maximum absorbance at 460nm, and obeys Beer抯 law over the concentration range 0.01ug/ml^1.20ug/ml of bismuthous(III). It has a molar absorptivity of 7.1×105 [L/mol穋m]. It indicated the resin phase spectrophotometry is a sensitive analytical method for trace bismuthous. It is 18 times higher than routine aqueous spectrophotometry. The relative standard deviations is 1.82% (n=6) for the measurements of 0.5ug/ml Bi(III). The detection limit of Bismuthous(III) is 1.4×10-8mol/L. The method has applied to the analysis Bi(III) in environmental water samples. In this paper, a new thin-layer ion-exchange resin phase analytical method is introduced. It is based on that, the bismuthous cation can associate with iodic anions, so as to formed an anion complex [BiI4-] in a strong acidic environments. This anion complex can also exchanges with a weaker anions on the surface active site of anion exchange resin, so that a [R+] [BiI4-] solid phase binary associational system is produced. Owing to the solid system is a great many dispersive particulates, it can be pressed to a thin-layer by press tools of the so called 搕hin-layer resin phase?or 搑esin phase? and using this solid association system spectrophotometry for the determination of trace metals. So it can increase the analytical sensitivity. This association system exhibits maximum absorbance at 460nm, and obeys Beer抯 law over the concentration range 0.01ug/ml^1.20ug/ml of bismuthous(III). It has a molar absorptivity of 7.1×105 [L/mol穋m]. It indicated the resin phase spectrophotometry is a sensitive analytical method for trace bismuthous. It is 18 times higher than routine aqueous spectrophotometry. The relative standard deviations is 1.82% (n=6) for the measurements of 0.5ug/ml Bi(III). The detection limit of Bismuthous(III) is 1.4×10-8mol/L. The method has applied to the analysis Bi(III) in environmental water samples.
出处 《Chinese Journal of Reactive Polymers》 2003年第1期50-58,共9页 中国反应性高分子(英文版)
基金 Natural Science Foundation of Henan Province
关键词 Thin-layer phase Spectrophotometry Trace bismuth (III) DETERMINATION 痕量铋(III) 薄层树脂 分光光度测定法 测量 离子交换树脂 分析方法
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部