期刊文献+

CAD系统中几何变动的建模与仿真研究 被引量:2

Modeling and Simulation of Geometric Variation for CAD System
下载PDF
导出
摘要 研究了三维CAD系统中几何变动的零件层建模和装配层仿真。首先,提出了变动几何约束概念和分类,研究了几何变动的定性和定量表示和建模;然后,研究了基于变动几何约束网络及其运动学模型的几何变动仿真方法,包括完全约束仿真方法和可装配性仿真方法;最后,给出了几何变动建模和仿真的总体框架和系统实现,并通过实例分析验证了方法的有效性。 The modeling and simulation of geometric variation in the part and assembly layer of 3D CAD system is studied in this paper. Firstly, the concept and classification of variational geometric constraints are presented. The qualitative and quantitative representation and modeling of geometric variation is studied. Secondly, based on the variational geometric constraints network and its kinematic model, the method of geometric variation simulation which includes well-constrained simulation and assemblability simulation is presented. Finally, the framework and system of modeling and simulation of geometric variation is presented and integrated into 3D CAD system. An example is analyzed to show the scheme to be effective.
出处 《系统仿真学报》 CAS CSCD 2003年第9期1337-1340,1346,共5页 Journal of System Simulation
基金 中国博士后基金(中博基(2002)17号) 国家自然科学基金项目(60274044)。
关键词 特征 变动几何约束 运动学模型 仿真 features variational geometric constrains kinematic model simulation
  • 相关文献

参考文献9

  • 1胡洁,吴昭同.面向装配的变动几何约束网络的生成方法研究[J].计算机辅助设计与图形学学报,2002,14(1):79-82. 被引量:13
  • 2胡洁,吴昭同.变动几何约束网络的运动学模型及其应用研究[J].计算机辅助设计与图形学学报,2002,14(6):594-597. 被引量:7
  • 3Requicha A A. Toward a theory of geometric tolerancing [J]. Int.J.Robotics Res, 1983, 2(4): 437-464.
  • 4Roy U, Liu C R. Feature-based representational scheme of a solid modeler for providing dimensioning and toletancing information [J].Robotics and Computer-Integrated Manufacturing 1988, 4(3/4):335-345.
  • 5Roy U, Banerjee p, Liu C R. Design of an automated assembly environment [J]. Computer Aided Design. 1989, 21(9): 567-569.
  • 6Bjorke O. Computer-Aided Tolerancing [M]. 2^nd ed. New York: ASME Press. 1989.
  • 7Chase KW, Gao J, Magleby S R Sorensen C D. Including geometric feature variation in tolerance analysis of mechanical assemblies [J].IIE Transactions. 1996. 28: 795-807.
  • 8Srinivasan V. An integrated view of geometrical product specification and verification [A]. Proceedings of 7^th CIRP Seminars on Computer Aided Tolerancing [C]. Cachan, France, 2001, 4: 7-18.
  • 9Hu Jie, wu Zhao-tong, Yang Jiang-xin. Variational geometric constraints network for computer aided tolerancing [A]. Proceedings of 7^th CIRP Seminars on Computer Aided Tolerancing [C]. Cachan,France. 2001.4:213 - 222.

二级参考文献2

共引文献14

同被引文献23

  • 1刘巽尔.偏差、公差和误差[J].机械工业标准化与质量,2006(10):15-17. 被引量:1
  • 2刘检华,宁汝新,阎艳.集成化虚拟装配工艺规划系统研究[J].中国机械工程,2006,17(23):2486-2491. 被引量:28
  • 3ROY U,LI B.Representation and interpretation ofgeometric tolerances for polyhedral objects.IL:Size,orientation and position tolerances[J].Computer-AidedDesign,1999,31(4):273-285.
  • 4WANG Haoyu,PRAMANIK N,ROY U,et al.A Schemefor mapping tolerance specifications to generalizeddeviation space for use in tolerance synthesis andanalysis[J].IEEE Transactions on Automation Scienceand Engineering,2006,3:81-91.
  • 5TECH T B,SENTHIL KUMAR A,SUBRAMANIAN VA.CAD integrated analysis of flatness in a formtoelrance zone[J].Computer Aided-Design,2001,33:853-865.
  • 6CLEMENT A,RIVIERE A.Tolerancing versus nominalmodeling in next generation CAD/CAM system[C]//Proceedings of 3rd CIRP Seminars on Aided Tolerancing,London,Chapman&Hall.1993:97-114.
  • 7SHEN Z,SHAH J J,DAVIDSON J K.A completevariation algorithm for slot and tab features for 3Dsimulation-based tolerance analysis[C]//ASME DETC/DACConference,Long Beach,CA,Sept.,2005.2005:25-28.
  • 8SHAH J.Navigating the tolerance analysis maze[C]//ASME DETC,Montreal,Canada,2002,Tutorial Notes.
  • 9PRISCO U,GIORLEO G.Overview of current CATsystems[J].Integrated Computer-aided Engineering,2002,9(4):373-387.
  • 10CHIESI F,GOVERNI L.Tolerance analysis witheM-TolMate[J].Transactions of the ASME Journal ofComputing and Information Science in Engineering,2003,3(1):100-105.

引证文献2

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部