摘要
通过对典型工况的计算值进行插值计算,得某测点的实际工况值。用VisualBasic6.0编程显示大坝观测值的过程线,可对过程线进行放大、缩小和移动操作。用不同的图片框显示坐标轴与过程线,坐标轴在放大、缩小和移动过程线时总显示在屏幕上。
The value of the measuring point in actual operating mode is gained by interpolation applied to the computed value of measuring point in some representative operating modes.The hydrograph of a dam is showed by Visual Basic 6.0 program.The hydrograph can be enlarged,reduced and moved.The coordinate and the hydrograph are displayed in different picture box and the coordinate is always visible when the hydrograph is changed.
出处
《计算机与现代化》
2003年第9期82-83,85,共3页
Computer and Modernization
