期刊文献+

浅析耗能剪切型连梁阻尼器在大型场馆类项目中的应用 被引量:1

Application of Energy Dissipation Shear Coupling Damper in Large Stadium Projects
下载PDF
导出
摘要 针对目前消能减震技术中新兴的连梁阻尼器技术,结合郑州博物馆新馆项目实际应用阐述其特点。连梁阻尼器作为剪力墙中的可更换构件在郑州市博物馆新馆项目结构形式采用型钢(钢筋)混凝土框架+抗震墙(筒)体系,共设计10个核心筒,核心筒剪力墙为实腹钢板剪力墙。通过结构计算和深化设计,耗能连梁阻尼器技术的应用能够极大的降低结构施工风险,以较少措施费用的投入,降低施工管理过程中不可遇见的风险因素,从而达到节约施工成本,确保工程质量,确保施工安全的目的。本文结合实际对连梁阻尼器的工作状况进行研究,总结阻尼器对结构性能的影响,探索现场施工工艺,为后续联肢剪力墙结构体系的研究与工程应用提供资料和数据支撑。 Aiming at the new technology of coupling dampers in energy dissipation technology,this paper expounds the characteristics of the new museum project in Zhengzhou Museum.The new project structure of Zhengzhou Museum adopts steel(steel)concrete frame+anti-seismic wall(tube)system,and 10 core tubes are designed.The core tube shear wall is a solid steel plate shear wall.Through structural calculation and deepened design,the application of energy dissipating beam damper technology can greatly reduce the risk of construction,and reduce the risk factors that can not be met in the process of construction management,so as to achieve the purpose of saving the construction cost,ensuring the quality of the project and ensuring the safety of the construction.This project studies the working condition of the continuous beam dampers,summarizes the influence of the damper on the structural performance,and explores the field construction technology,providing data and data support for the research and engineering application of the joint shear wall structure system in the future.
作者 方园 殷广建 陈曦 王学福 刘明 陈少东 FANG Yuan;YIN Guangjian;CHEN Xi;WANG Xuefu;LIU Ming;CHEN Shaodong(General Construction Co.of CCTEB Group Co.,Ltd.,Wuhan,Hubei 430064,China)
出处 《施工技术》 CAS 2018年第A04期1150-1154,共5页 Construction Technology
关键词 博物馆 劲性混凝土群筒结构体系 耗能连梁阻尼器 消能减震 设计技术研究 museum rigid concrete group tube structure system energy dissipation coupling beam damper energy dissipation design technology research
  • 相关文献

参考文献8

二级参考文献55

  • 1李爱群,丁大钧,曹征良.带摩阻控制装置双肢剪力墙模型的振动台试验研究[J].工程力学,1995,12(3):70-76. 被引量:6
  • 2王祖华,桑文胜.劲性钢筋混凝土连梁的性能与计算方法[J].华南理工大学学报(自然科学版),1995,23(1):34-43. 被引量:20
  • 3信次大森,速山幸三,长徹郎,等.スリツト式耐力壁の実驗的研究[J].日本建筑学会论文报告集,1966,41:204.
  • 4Chung H, Moon B, Lee S, et al. Seismic performance of friction dampers using flexure of RC shear wall system[J]. The Structural Design of Tall and Special Buildings, 2009, 18 (7) : 807-822.
  • 5Zhao Q, Astaneh-Asl A. Cyclic behavior of traditional and innovative composite shear walls [ J ]. Journal of Structural Engineering, 2004, 130(2) : 271-284.
  • 6Priestley M J N, Calvi G M, Kowalsky M J. Displacement-based seismic design of structures [ M ]. Pavia, Italy: Iuss Press, 2007:372-386.
  • 7Harries K, Mouhon J, Clemson R. Parametric study of coupled wall behavior: implications for the design of coupling beams [ J ]. Journal of Structural Engineering, 2004, 130(3) : 480-488.
  • 8Chaallal O, Nollet M J. Upgrading the degree of coupling of coupled shear walls [ J ]. Canadian Journal of Civil Engineering, 1997, 24(6) : 986-995.
  • 9Rosman R. Approximate analysis of shear walls subject to lateral loads [ J]. Journal Proceedings, ACI, 1964,61(6): 717-734.
  • 10Heidebrecht A C, Smith B S. Approximate analysis of tall wall-frame structures [ J ]. Journal of the Structural Division, 1973, 99(2): 199-221.

共引文献127

同被引文献7

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部