摘要
Inter-salt shale oil reservoirs located between two salt layers are always accompanied by high temperature and high salinity. However, the present commonly used water-soluble polymers in fracturing fluids su er from poor tolerance to high temperature and high salinity. Thermoviscosifying polymers(TVP) whose aqueous solution shows viscosity increase upon increasing temperature and salt concentration have received considerable attention recently, which is promising for utilization in fracturing fluids to overcome these problems. In this work, both the salt-induced viscosifying property and mechanism of a TVP solution were investigated and the performance of TVP used as fracturing fluid based on the conditions of the Jianghan inter-salt shale oil reservoir in China was evaluated. It is found that the salt-induced viscosifying property of the TVP solution decreases with temperature and shear rate, but increases with polymer concentration. The number of intermolecular hydrophobic domains increases with the salt concentration contributing to the strengthening of a 3D network structure, which results in an increase in viscosity. In addition, the TVP fracturing fluid formulated with saturated brine exhibits excellent temperature and shear resistance, sand-suspending performance, and gel-breaking performance. Its viscosity remains above50 m Pa s after being sheared for 1 h even at a high temperature of 140 °C and the sand-suspending stability can be maintained for more than 1 week at 100 °C. Furthermore, the fracturing fluid can be easily broken down within 12h using 0.2 wt%–0.3 wt% potassium persulfate without residue.
Inter-salt shale oil reservoirs located between two salt layers are always accompanied by high temperature and high salinity. However, the present commonly used water-soluble polymers in fracturing fluids su er from poor tolerance to high temperature and high salinity. Thermoviscosifying polymers(TVP) whose aqueous solution shows viscosity increase upon increasing temperature and salt concentration have received considerable attention recently, which is promising for utilization in fracturing fluids to overcome these problems. In this work, both the salt-induced viscosifying property and mechanism of a TVP solution were investigated and the performance of TVP used as fracturing fluid based on the conditions of the Jianghan inter-salt shale oil reservoir in China was evaluated. It is found that the salt-induced viscosifying property of the TVP solution decreases with temperature and shear rate, but increases with polymer concentration. The number of intermolecular hydrophobic domains increases with the salt concentration contributing to the strengthening of a 3D network structure, which results in an increase in viscosity. In addition, the TVP fracturing fluid formulated with saturated brine exhibits excellent temperature and shear resistance, sand-suspending performance, and gel-breaking performance. Its viscosity remains above50 m Pa s after being sheared for 1 h even at a high temperature of 140 °C and the sand-suspending stability can be maintained for more than 1 week at 100 °C. Furthermore, the fracturing fluid can be easily broken down within 12h using 0.2 wt%–0.3 wt% potassium persulfate without residue.
基金
financial support from State Energy Center for Shale Oil Research and Development(Grant No.G5800-17-ZS-KFNY008)
