期刊文献+

C194铜合金热压缩变形流变应力 被引量:22

Rheologic Stress of C194 Copper Alloy Under Hot Compression Deformation
下载PDF
导出
摘要 在Gleeble-1500热模拟机上对C194铜合金在应变速率为0.01~10s^(-1)、变形温度为650~850℃条件下的流变应力行为进行了研究.结果表明:在实验范围内,C194铜合金热压缩变形时发生明显的动态再结晶;用Zener-Hollomon参数的指数函数形式能较好的描述C194铜合金高温变形时的流变应力行为;所获得的应变速率ε解析表达式中,参数A和β值分别为6.35×10~9 s^(-1)和0.119 MPa^(-1);其热变形激活能Q为316.11 kJ/mol. The rheologic stress of C194 copper alloy was investigated in the temperature range from 650℃ to 850℃ and at strain rale range from 0.01s -1 to 10 s-1 on Gleeble - 1500 test machine.The experimental results show that dynamic recryslallization occurs in evidence during hot compression deformation of C194 copper alloy in the range of experiments. The rheologic stress of C194 copper alloy during high temperature can be represented by a Zener- Hollomon parameter in the exponent - type equation. A and B in the analytical expressions of e fit to be 6.35 ×109s-1,0.119 MPa-respectively. The hot deformation activation energy of C194 copper alloy during hot deformation is 316.11 kJ/mol.
出处 《湘潭大学自然科学学报》 CAS CSCD 2003年第3期82-86,共5页 Natural Science Journal of Xiangtan University
基金 中南大学高新张铜技术研究开发中心开发课题(ZT03-1)
关键词 C194铜合金 热压缩变形 流变应力 Zener—Hollomon参数 热变形激活能 C194 copper alloy hot compression deformation rheologic stress Zener - hotlomon parameter deformation activation energy
  • 相关文献

参考文献6

  • 1关德林.晶体的高温塑性变形[M].,1989.24-85.
  • 2曹育文,马莒生,唐祥云,王碧文,王世民,李红.QFe2.5型引线框架用铜合金热处理工艺研究[J].金属热处理学报,1998,19(4):32-37. 被引量:20
  • 3王碧文 王涛.电子工业用铜和铜合金现状与展望[A].中国有色金属加工工业协会中国电子材料行业协会.电子工业用铜合金材料研讨会文集[C].北京,2002..
  • 4马莒生.引线框架材料发展的趋势[A].中国有色金属加工工业协会中国电子材料行业协会.电子工业用铜合金材料研讨会文集[C].北京,2002.47.
  • 5Zener C, Hollomon J H. Effect of strain - rate upon the plastic flow of steel[J]. J Appl Phys, 194.4, 15( 1 ) :22.
  • 6Wong W A, Jonas J J. Aluminium Extrusion as a thermally activated process[J]. Trans, AIME, 1968,242:2 271.

二级参考文献2

  • 1李智诚,电子元器件新型有色金属材料的生产与应用,1991年,117页
  • 2团体著者,重有色金属材料加工手册.1,1979年,16页

共引文献21

同被引文献219

引证文献22

二级引证文献110

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部