摘要
聚合物驱后剩余油分布特征是选择进一步提高采收率技术措施的重要依据。通过利用核磁成像技术,在二维纵向层内非均质物理模型和五点法并网仿真平面非均质物理模型上对聚合物驱后剩余油分布特征进行了实验研究。实验结果表明,核磁成像实验方法所得模型剩余油分布特征与常规实验方法所得结果基本一致。由核磁成像实验方法确定的聚合物驱后剩余油分布特征是,对于二维纵向层内非均质物理模型,剩余油主要分布在中、低渗透层;对于五点法并网仿真平面非均质物理模型,剩余油主要分布在远离注入井的边、角区域。
It is very important for petroleum engineers to know where remaining oil distributes after polymer flooding when EOR method is selected. In this paper, laboratory evaluations on remaining oil distribution after polymer flooding had been done in two kinds of physical models by using NMR technology. Experimental results show that the distribution characteristics of remaining oil obtained by NMR method are generally consistency with those obtained by traditional physical simulation, and the remaining oil after polymer flooding distributes mainly in lower permeable layer for rhythmical reservoir or in area far from injector for inside homogeneous reservoir.
出处
《大庆石油地质与开发》
CAS
CSCD
2003年第4期61-63,共3页
Petroleum Geology & Oilfield Development in Daqing
关键词
聚合物驱
物理模型
核磁成像
剩余油分布
实验研究
polymer flooding
physical model
NMK technology
distribution of remaining oil
laboratory evaluation