期刊文献+

EFFICIENCY ANALYSIS OF DOUBLE CRANK RING-PLATE-TYPE PIN-CYCLOIDAL GEAR PLANETARY DRIVE 被引量:5

EFFICIENCY ANALYSIS OF DOUBLE CRANK RING-PLATE-TYPE PIN-CYCLOIDAL GEAR PLANETARY DRIVE
下载PDF
导出
摘要 From the general formula for calculating the efficiency of planetary geartrains, the efficiency of the double crank ring-plate-type pin-cycloidal gear planetary drive isderived. To prove the theory, an experimental study has been conducted. The tested value of theefficiency of a sample set of the new-type drive in the experiment agrees with the calculated one.It shows that the new-type drive is of not merely high bearing capacity, but also quite highefficiency. From the general formula for calculating the efficiency of planetary geartrains, the efficiency of the double crank ring-plate-type pin-cycloidal gear planetary drive isderived. To prove the theory, an experimental study has been conducted. The tested value of theefficiency of a sample set of the new-type drive in the experiment agrees with the calculated one.It shows that the new-type drive is of not merely high bearing capacity, but also quite highefficiency.
出处 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2003年第3期252-255,共4页 中国机械工程学报(英文版)
基金 This project is supported by National Natural Science Foundation of China (No.50175011).
关键词 Double crank ring-plate-type Pin-cycloidal gear planetary drive Meshefficiency Double crank ring-plate-type Pin-cycloidal gear planetary drive Meshefficiency
  • 相关文献

参考文献8

  • 1李力行 关天民.大型摆线针轮行星传动的合理结构和齿形[J].机械工程学报,1988,24(3):28-33.
  • 2何卫东,李欣,李力行.双曲柄环板式针摆行星传动的研究[J].机械工程学报,2000,36(5):84-88. 被引量:28
  • 3何卫东,李力行,徐永贤,陈谌闻.高精度RV传动的受力分析及传动效率[J].机械工程学报,1996,32(4):104-110. 被引量:39
  • 4Li Lixing, Guan Tianmin, He Weidong, et al. The optimum tooth profile on the cycloid gear and the computer aided design of cycloid drive. In:Ninth World Congress on the Theory of Machines and Mechanisms, Milan, 1995(1): 355~359.
  • 5Li Lixing, Guan Tianmin, Wang Zifu, et al. The computer aided design of cycloid drive. Chinese Journal of Mechanical Engineering, 1990,3(2): 221~231.
  • 6Li Lixing, He Weidong, Li Xin. Study on double crank ring-plate-type cycloid drive. In: Tenth World Congress on the Theory of Machines and Mechanisms, Oulu, Finland, 1999(6): 20~24.
  • 7He Weidong, Li Xin, Li Lixing, et al. A new drive with high-load capacity and high transmission efficiency. In: Design Engineering Technical Conferences & Computers and Information in Engineering Conference,Maryland, 2000.
  • 8施永乐.行星轮系效率分析[J].辽宁机械,1982,(6):4-8.

二级参考文献7

共引文献70

同被引文献39

  • 1黄文振.三环减速器振动问题研究[J].机械工程学报,1994,30(2):64-68. 被引量:41
  • 2何卫东,李欣,李力行.高承载能力高传动效率新型针摆行星传动研究[J].中国机械工程,2005,16(7):565-569. 被引量:16
  • 3刘伟强,张启先,雷天觉.SH型三环减速器采用固体润滑初探[J].机械工程学报,1995,31(3):39-43. 被引量:7
  • 4刘伟强,张启先,雷天觉.SH三环减速器载荷均衡的研究[J].机械工程学报,1995,31(4):1-5. 被引量:20
  • 5李力行.摆线针轮行星传动的齿形修正及受力分析[J].机械工程学报,1986,22(5).
  • 6LI Xin,HE Weidong,LI Lixing,et al.A new cycloid drive with high-load capacity and high efficiency[J].ASME Journal of Mechanical Design,2004,126(3):683-686.
  • 7LI Xin,LINDA Schmidt.Grammar-based designer assistance tool for epicyclic gear trains[J].ASME Journal of Mechanical Design,2004,126(3):895-901.
  • 8KAHRAMAN A.Planetary gear train dynamics[J].ASME Journal of Mechanical Design,1994,116:713-720.
  • 9HE Weidong,LI Lixing,LI Xin.Test research on two motors driven double crank ring-plate-type pin-cycloid-gear planetary drive[C] //12th IFToMM World Congress,Besancon,2007:375-381.
  • 10Li L X, Guan T M, He W D, et al. The optimum tooth profile on the cycloid gear and the computer aided design of cycloid drive[A]. Ninth World Congress on the Theory of Machines and Mechanisms [C]. Milan, 1995. 355 - 359.

引证文献5

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部