摘要
In this paper, a TiNi shape memory alloy fiber Ni matrix composite was fabricated by an electroplating method using TiNi alloy as the cathode and Ni as the anode. The constrained martensitic transformation behaviors of the TiNi alloy were studied by differential scanning calorimeter (DSC), and the results showed that two endothermic peaks appear on the DSC heating curves and the reverse transformation temperatures increase with increasing prestrain levels. Moreover, comparing to the free transformation, the temperature window of the constrained reverse transformation is widely expanded due to the influence of recovery stress.
In this paper, a TiNi shape memory alloy fiber Ni matrix composite was fabricated by an electroplating method using TiNi alloy as the cathode and Ni as the anode. The constrained martensitic transformation behaviors of the TiNi alloy were studied by differential scanning calorimeter (DSC), and the results showed that two endothermic peaks appear on the DSC heating curves and the reverse transformation temperatures increase with increasing prestrain levels. Moreover, comparing to the free transformation, the temperature window of the constrained reverse transformation is widely expanded due to the influence of recovery stress.
基金
supported by the National Natural Science Foundation of China,No.50071037
the China Postdoctoral Science Foundation
