期刊文献+

离子交换法制取植酸的研究 被引量:1

STUDY ON THE ABSTRACTION OF PHYTIC ACID BY ION EXCHANGE METHOD
下载PDF
导出
摘要 用阴离子交换树脂吸附法从棉籽饼中提取植酸的适宜条件是:树脂吸附菲丁的温度为5~20℃,菲丁浸提液的酸度pH为1~4,树脂通液速率为10~30ml/min;洗脱树脂吸附菲丁的温度为18~40℃,洗脱液的酸度pH为7~10,树脂通液速率为5~20ml/min.离子交换法与传统法相比,提取植酸的纯度提高了17.6个百分点,提取率提高了5.2个百分点. This paper reports a new method used for producing phytic acid-absorbing phytin contained in cottonseed cakes by anion exchange resin. The suitable conditions for this process are : the temperature for combining resin with phytin is 5~20℃, the pH of the liquid for gaining phytin 1~4, the rate of the liquid passing through the resin 10~30ml/min; the temperature for separating phytin from resin 18~40℃, the pH of the liquid for releasing phytin 7~10, the rate of the liquid passing through the resin 5 to 20 ml/min. Compared with the traditonal technique, this new method can increase the purity of phytic acid by 17.6% and the extraction rate by 5.2%.
出处 《青岛医学院学报》 1992年第2期118-120,共3页 Acta Academiae Medicinae Qingdao Universitatis
关键词 植酸 制取 离子交换法 phytic acid producing themethod of ion exchange
  • 相关文献

参考文献1

共引文献10

同被引文献9

  • 1姜峰,赵燕禹,姜梅兰,李修伦.功率超声在中药提取过程中的应用[J].化工进展,2007,26(7):944-948. 被引量:27
  • 2REDDY N R. Phytate in legumes and cereals[J]. Advances in Food Research, 1982, 28: 20-24.
  • 3LYON D B. Studies on the solubility of Ca, Mg, Zn and Cu in cereal products[J]. Am J Clin Nutr, 1984, 39: 190-193.
  • 4SING M, KRIKORIAN A D. Inhibition of trypsin activing in vitro by phytate[J]. Agric Food Chem, 1982, 30: 799-803.
  • 5KNUCKLES B E. Effect of phytate and other myomositol phosphate esters on α-amylase digestion of starch[J]. Journal of Food Science, 1978, 52: 719-722.
  • 6郦伟章.测定植酸方法评价.食品科学,1988,9(4):49-51.
  • 7ROBERTS R T. The uses of ultrasound in food technology[J]. Ultrasonic Chemistry, 1993, 15: 119-121.
  • 8王海青,刘克为,于兹东,刘坤,刘玉兰.农产品中植酸含量测定方法的比较研究[J].青岛大学学报(工程技术版),1999,14(3):37-39. 被引量:9
  • 9高华,吕文光,曹曼.分光光度法测定植酸的研究[J].青岛医学院学报,1991,27(4):303-305. 被引量:12

引证文献1

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部