期刊文献+

Mo/Cr_2O_3体系润滑状态转化及润滑膜结构

Transition of lubrication regime and structure of solid lubrication film for Mo/Cr_2O_3 tribosystem
原文传递
导出
摘要 综合应用 SEM, WDS, SAM及 XPS等技术逐一分析了不同润滑状态下Mo/Cr2O3摩擦日表面膜的结构:观测到润滑状态转化和试件表面反应膜化学结构之间的对应联系;揭示了边界润滑状态下试件表面上形成了含有石墨和 MoS2的混合团体润滑膜,这是Mo/Cr2O3体系高温下具有良好摩擦特性的关键。 In this paper the chemical structure of solid lubrication film formed on the specimen surface under different lubrication regime was analyzed using Scanning Electron Microprobe (SEM), Wavelength Dispersion Spectroscopy (WDS), Scanning Auger Microprobe (SAM) and X-rays Photoelectron Spectroscopy (XPS). It was observed that there was a defined corresponding relation between the transition of lubrication regime and the chemical structure of solid lubrication film. The experimental results show that a mixed solid lubrication film-containing graphite and MoS2 is formed on the surface under the boundary lubrication regime, which result in a good tribology behaviour of Mo/Cr2O3 system at high temperature.
出处 《清华大学学报(自然科学版)》 EI CAS CSCD 北大核心 1992年第5期43-51,共9页 Journal of Tsinghua University(Science and Technology)
基金 国家自然科学基金 国家教委博士点专项基金
关键词 润滑膜 表面分析 摩擦 氧化铬 lubrication film, surface analysis, reaction at interface
  • 相关文献

参考文献1

二级参考文献1

  • 1王应龙,试验技术与试验机,1988年,4期,13页

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部