期刊文献+

亚临界热处理对高铬白口铸铁组织和耐磨性的影响 被引量:19

Effect of Subcritieal Treatment on Microstructure and Wear Resistance of a High Chrome White Cast Iron
下载PDF
导出
摘要 研究了亚临界处理温度和保温时间对高铬白口铸铁组织转变、硬度和耐磨性的影响 ,研究表明 ,铸态组织中含有大量残留奥氏体的高铬白口铸铁 ,在 5 0 0~ 6 5 0℃之间进行热处理 ,其中的残留奥氏体在冷却到室温的过程中会转变成马氏体而造成高铬铸铁硬度升高。在适当的处理温度和保温时间下 ,高铬白口铸铁能得到最高的硬度 ,温度过高或保温时间过长都会导致其硬度下降。磨损试验结果表明 。 The effect of subcritical treating temperature and time on microstructure, hardness and wear resistance of a high chromium white cast iron which has a great amount of the retained austenite is studied.The results show that,the retained austenite can transform into martensite in cooling to room temperature after heat treated at 500~600℃ leading the increase of hardness of the high chromium white cast iron. After subcritical treating at suitable temperature and time, the high chromium white cast iron can get the most high hardness.Wear test results show that the subcritical treatment can increase wear resistance of the high chromium white cast iron.
出处 《材料热处理学报》 EI CAS CSCD 北大核心 2003年第3期54-57,共4页 Transactions of Materials and Heat Treatment
关键词 高铬白口铸铁 亚临界热处理 马氏体相变 硬化 耐磨性 high chromium white cast iron subcritical treatment martensite transformation wear resistance
  • 相关文献

参考文献10

  • 1杜家林.高铬铸铁的热处理新工艺[J].金属热处理,1996,21(11):33-34. 被引量:15
  • 2徐志明,尹志新.高铬铸铁铸态奥氏体的亚临界热处理的研究[J].金属热处理,1993,18(4):10-15. 被引量:23
  • 3袁锡爵.高铬铸铁的亚临界处理[J].现代铸铁,1987,2:40-42.
  • 4杜家林.高铬白口铸铁的显微组织及其热处理发展动向[J].金属热处理,1988,(11):10-14.
  • 5张彪,郭建瑞,张彬.含锰4%的高铬铸铁的亚临界淬火[J].太原重型机械学院学报,1993,14(3):74-79. 被引量:7
  • 6徐志明,杨月君,尹志新.Cr15Mo2Cu高耐磨铸铁的热处理工艺研究[J].金属热处理,1995,20(3):8-11. 被引量:8
  • 7Sare I R, Arnold B K. Influence of heat treatment on the high-stress abrasion resistance and fracture toughness of alloy white cast iron[J]. Metallurgical and Materials Transactions, 1995,26A: 1785 - 1793.
  • 8Zhang M X, Kelly P M. The effect of heat treatment on the toughness, hardness and microstrueture of low carbon white east irons[J]. J Mater Sci,2001,36(16) : 3865 - 3875.
  • 9Tabrett C P, Sare I R. The effect of heat treatment on the abrasion resistance of alloy white iron[J]. Wear, 1997,203- 204: 206- 219.
  • 10袁锡爵.高铬铸铁的亚l临界处理.现代铸铁,1987,2:40-42.

二级参考文献6

  • 1王绪,李承基.高铬铸铁显微组织稳定性的研究[J].金属热处理,1993,18(11):14-19. 被引量:6
  • 2杜家林,金属热处理,1988年,11期,10页
  • 3袁锡爵,现代铸造,1987年
  • 4Potaloba M S,铸造,1986年
  • 5张德恩,铸造,1985年,4期
  • 6方亮,周庆德.高铬铸铁的回火处理与残余应力[J]机械工程材料,1987(04).

共引文献35

同被引文献149

引证文献19

二级引证文献95

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部