Ni-Cr-Fe-Nb系高温合金中的相变
被引量：1
摘要
引言 Ni-Cr-Fe-Nb基时效合金含有少量Al、Mo、Ti和其它元素,在从低温到650-700℃的范围有好的制造适应性、焊接性、抗焊接裂纹能力,作为结构和高温材料已广泛用于各种工业领域。几种著名高温合金工作温度达650-700℃。
出处
《上海钢研》
2003年第3期44-47,共4页
Journal of Shanghai Iron and Steel Research
同被引文献28
-
1徐祖耀.相变及相关过程的内耗[J].中山大学学报（自然科学版）,2001,40(z2):224-231. 被引量：5
-
2Gu Y, Fu SZ, Wu J, et al. Equations of state studies at SIL P by laser-driven shock waves[J]. Laser and Particle Beams,1996,14(2) :157-169.
-
3Colgan E G. A review of thin-film aluminide formation [J]. Materials Science Reports, 1990,5 : 1-44.
-
4Chen Liang-Guang, Lin Su-Jien, Chang Shou-Yi. Tensile properties and thermal expansion behaviors of continuous molybdenum fiber reinforced aluminum matrix composites [J]. Composites Science and Technology, 2006, 66:1793- 1802.
-
5Zdujic M, Poleti D, Karanovid Lj, et al. Intermetallic phases produced by the heat treatment of mechanically alloyed A1-Mo powders[J]. Materials Science and Engineering, 1994,185:77-86.
-
6Almeida A, Carvalho F, Carvalho PA, et al. Laser developed Al - Mo surface alloys:Microstructure, mechanical and wear behaviour[J]. Surface & Coatings Technology, 2006(200) :4782-4790.
-
7冯端.金属物理学:相变[M].北京:科学出版社,2000.
-
8Lee B J. Prediction of Ti/Al2O3 interface reaction products by diffusion simulation[J]. Acta Materialia. 1997, 45 (10) :3993-3999.
-
9Lee B J, Hwang N M, I.ee H M. Prediction of interface reaction products between Cu and various solider alloys by thermodynamic calculation[J]. Acta Materialia, 1997,45 (5) :1867-1874.
-
10Choi W H, Lee H M. Prediction of primary intermetallic compound formation during interracial reaction between Sn-based solder and Ni substrate[J]. Scripta Materialia, 2002,46(7) :777-781.
-
1吴全兴.金属间化合物——21世纪的高温材料[J].稀有金属快报,1997,16(8):26-28.
-
2韩传玺.重量小,强度高的高温材料—Ti3Al,Tial金属间化合物[J].钛工业进展,1989,6(3):28-29.
-
3崔大伟.一种活塞环用钴基高温合金的热处理研究[J].潍坊学院学报,2009,9(6):1-3.
-
4郭毓彬.非磁性低膨胀合金的研究[J].金属材料研究,1999,25(3):64-68. 被引量：1
-
5机床工业的发展趋势—美国部分著名机床制造厂商展望机床工业的未来[J].工具展望,2001(3):6-9.
-
6屈乃琴.高温用铂材[J].稀有金属快报,1998,17(8):10-12.
-
7刘晋伟.高温钛铝基合金及其氧化行为[J].稀有金属快报,1999,18(11):20-22.
-
8磨料磨具行业著名产品、十强企业等名单[J].磨料磨具通讯,2008(10):21-22.
-
9任铁梅.高温超导新动向[J].国外稀有金属动态,1992(18):1-2.
-
10沈凯,尹志民,王涛.TEM STUDY ON MICROSTRUCTURAL DEVELOPMENT OF SINGLE-AGEING 7055 ALUMINUM ALLOYS[J].Transactions of Nanjing University of Aeronautics and Astronautics,2007,24(3):265-269.
