期刊文献+

FRP复合材料与混凝土的粘结强度试验研究 被引量:41

Experimental study on bond strength between FRP and concrete
原文传递
导出
摘要 FRP复合材料与混凝土的粘结强度是混凝土结构外粘FRP板材这一加固新技术的重要研究课题。本文首先采用FRP板-混凝土块搭接接头的单剪试验方法,考虑FRP板的搭接长度、支座高度变化、试件对中偏位、FRP板与混凝土块的宽度比等因素,对FRP与混凝土的粘结强度进行了深入研究。然后利用试验结果与最近提出的陈-滕粘结强度公式作了比较研究。研究结果表明:(1)粘结破坏有FRP剥离破坏和混凝土拉剪破坏两种形式;(2)FRP板的搭接长度、试件对中偏位、FRP板与混凝土块的宽度比等因素对粘结强度有显著影响,支座高度变化也有一定影响;(3)粘结强度不小于“有效粘结长度”时,陈-滕粘结强度公式具有较高精度。 The bond strength between fiber rein forced plastic /polymer composites(FRP)sheet and concrete was studied by experiment on a simple shear test s et-up with emphasis on the effects of the bond length,support height,loading offset and FRP-to-concrete width ra tio.The test results were compared w ith those obtained from the Chen and T eng's bond strength formulas.Following c onclusions are drawn from this study:(1)there are two kinds of failure modes,namely FRP debonding failure and con crete tension-shear failure;(2)the bond length,loading offset and FRP-to-concrete width ratio have significant effects on bond strength while the support height also has certain effect;(3)the results obtaind from Chen-Teng' s bond strength formula agree well wi th the test results,provided the total bond length is no less than the effective bond len gth.
作者 姚谏 滕锦光
出处 《建筑结构学报》 EI CAS CSCD 北大核心 2003年第5期10-17,23,共9页 Journal of Building Structures
关键词 FRP复合材料 粘结强度 混凝土结构 单剪试验 FRP板 支座 FRP composites bond strength FRP-to-concrete bonded joints single s hear test
  • 相关文献

参考文献19

  • 1岳清瑞.我国碳纤维增强塑料(CFRP)加固修复土木建筑结构技术研究应用现状与展望[A]..中国纤维增强塑料(FRP)混凝土结构学术交流会(首届学术会议论文集)[C].北京,2000.21—26.
  • 2TENG J G, CHEN J F, SMITH S T, LAM L. FRP-strengthened RC structures [M]. John Wiley and Sons Ltd.,2002.
  • 3MEIER U, DEURING M, MEIER H, SCHWEGLER G. FRP bonded sheets [A]. Fibre-reinforced-plastic (FRP) Reinforcement for Concrete Structures: Properties and Applications [ C ], Amsterdam, Elsevier Science, 1993.
  • 4CAROLIN A, NORDIN H, TaLJSTEN B. Concrete beams strengthened with near surface mounted reinforcement of CFRP[A]. Proceedings of International Conference on FRP Composites in Civil Engineering[C ]. Hong Kong, Elsevier Science, 2001, 2:1059 - 1066.
  • 5CHAJES M J, FINCH W W Jr, JANUSZKA T F, THOMSON T A Jr. Bond and force transfer of composites material plates bonded to concrete [J]. ACI Structural Journal, 1996, 93(2): 295-303.
  • 6HIROYUKI Y, WU Z. Analysis of debonding fracture properties of CFS strengthened member subjected to tension [A]. Non-metallic (FRP) reinforcement for concrete structures, Proceedings of 3rd International Symposium [ C ]. Sapporo, Jaoan, 1997, 1:475-482.
  • 7MAEDA T, ASANO Y, UEDA T, KAKUTA Y. A study on bond mechanism of carbon fiber sheet [A]. Non-metallic (FRP)reinforcement for concrete structures, Proceedings of 3rd International Symposium [C]. Sapporo, Japan, 1997,1: 279 - 285.
  • 8NEUBAUER U, ROSTASY F S. Design aspects of concrete structures strengthened with externally bonded CFRP plates [A]. Proceedings, of 7th International Conference on Structural Faults and Repairs [C]. Edinburgh, UK, Engineering Technics Press, 1997, 2: 109-118.
  • 9TaLJSTEN B. Defining anchor lengths of steel and CFRP plates bonded to concrete [J]. Int J Adhesion and Adhesives, 1997, 17(4): 319-327.
  • 10KHALIFA A, GOLD W J, NANNI A, AZIZ A. Contribution of externally bonded FRP to shear capacity of RC flexural members [J]. Journal of Composites for Construction, ASCE, 1998, 2(4): 195-203.

共引文献5

同被引文献299

引证文献41

二级引证文献213

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部