期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

尼龙共混复合材料的摩擦学性能研究 被引量：5

The Tribological Property of the Blend of Nylon
下载PDF
导出
摘要 研究制备了三种共混型尼龙复合材料UHMWPE/PA66、MAH g EPDM/PA66、UHMWPE/MAH g EPDM/PA66,对比评价了三种材料和纯尼龙66的摩擦学性能,对UHMWPE、MAH g EPDM对PA66摩擦磨损性能的影响进行了微观分析。摩擦磨损试验及SEM分析表明,MAH g EPDM/PA66材料具有良好的摩擦学性能和界面形态。MAH g EPDM明显提高尼龙的摩擦学性能,三元共混物的磨损过程中可以生成良好的聚合物转移膜。 Three kinds of blend alloy of Nylon were prepared and the tribological property of pure Nylon66, UHMWPE/PA66, MAHgEPDM/PA66 and UHMWPE/MAHgEPDM/PA66 were studied. The effect of UHMWPE and MAHgEPDM on tribological property were analyzed. MM200 friction wear test and SEM showed that the MAHgEPDM/PA66 had good tribological property and interface configuration. MAHgEPDM improved the tribological property of Nylon. The ternary blends of PA/MAHgEPDM/UHMWPE could form a good transfer film of polymer during wear process.
作者 王宏刚 简令奇 杨生荣 张国强
机构地区 中国科学院兰州化学物理研究所固体润滑国家重点实验室 嘉兴中达自润轴承工业有限公司
出处 《机械工程材料》 CAS CSCD 北大核心 2003年第10期40-42,51,共4页 Materials For Mechanical Engineering
关键词 尼龙共混复合材料 摩擦磨损 转移膜 blend alloy friction and wear transfer film
分类号 TB332 [一般工业技术—材料科学与工程]
  • 相关文献

参考文献10

  • 1Watanabe M, Yanaguchi H. The friction and wear properties of nylon [J]. Wear, 1986, 110: 379-388.
  • 2Bahadur S, Kapoor A. The effects of ZnF2, ZnS and PKS fillers on the tribological behavour of Nylonll [J]. Wear, 1992,155:49-61.
  • 3Bahdur S, Gonqg D, Anderegg J. Investigation of the influence of CaS, CaO and CaF2 fillers on the transfer and wear of Nylon by microscopy and XPS analysics [J]. Wear, 1996, 197:271-279.
  • 4Kukureka S N, Hooke C J, Rao M, et al. The effect of glass fiber reinforcement on the friction and wear of polyarnide 66 under dry rolling-sliding contact [J]. Tribology International, 1999, 32: 107-116.
  • 5Kudva R A, Keskkula H, Paul D R. Morophology and mechanical properties of eompatibilized nylon6/polyethylene blends [J]. Polymer, 1999, 40: 6003-6021.
  • 6Thomasl S, Groeninekx G. Reactive compatibilisation of heterogeneous ethylene propylene rubber (EPM)/nylon6 blends by the addition of compatibiliser[J]. Polymer, 1999, 40:5799-5819.
  • 7Okada O, Keskkula H, Paul D R. Nylon6 as a modifer for maleated ethylene-propylene elastomers [J]. Polymer 1999,40: 2699-2709.
  • 8Paalabiyik M, Bahaclur S. Mechanical and tribological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer[J]. Wear, 2000, 246:149 -158.
  • 9Liu C Z, Ren L Q, Tong J. Statistical wear analysis for PA-6/UHMWPE alloy, UHMWPE and A6 [J]. Wear, 2001, 249:31-36.
  • 10Bahadur S, Gong D. The transfer and wear of nylon and CuS-Nylon composites: Filler proportion and counterface characteristics[J]. Wear, 1993, 162:397-406.

同被引文献102

引证文献5

二级引证文献34

机械工程材料
2003年 第10期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部