期刊文献+

再熔融加热对亚共晶铝硅合金半固态组织演变的影响 被引量:1

Effect of re-melting heat treatment on semi-solid structure evolution of hypoeutectic Al-Si alloy
下载PDF
导出
摘要 提出一种新的亚共晶铝硅合金半固态坯料制备方法 ,即再熔融加热制备法 ,其特点是不对熔融金属施加任何机械的或电磁的搅拌力 ,而是通过在金属凝固过程中进行再熔融加热 ,获得具有近球状初晶相的亚共晶铝硅合金半固态组织。研究了Al 7%Si 0 .2 %Ti半固态合金再熔融加热制备过程中再熔融温度及保温时间等关键工艺参数对半固态组织的影响 ,并讨论了再熔融加热对半固态组织演变的影响。 A new method--re-melting heat treatment method was presented to produce semi-solid billets. Without introducing any physical stirring into the melt, the semi-solid structure with ellipsoidal solid particles was obtained by re-melting heating control during solidification of Al-7%Si-0.2%Ti alloy. Some key parameters in the course of re-melting heating control, such as re-melting temperature and holding time, were studied. The effect of re-melting heat treatment on semi-solid structure evolution was discussed.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2003年第5期1151-1155,共5页 The Chinese Journal of Nonferrous Metals
关键词 亚共晶铝硅合金 再熔融加热法 半固态合金 组织演变 re-melting heat treatment method semi-solid alloys structure evolution
  • 相关文献

参考文献13

  • 1Kamado S. Semi-solid forming of strain-induced various alloys[J]. Journal of Japan Institute of Light Metals, 1996, 46(2):77-82.
  • 2Kiuchi M, Sugiyama S. New process to manufacture semi-solid metals[A]. Brown S B, Flemings M C.Proc 2nd Int Conference on Semi-solid processing of alloys and Composites[C]. Warrendale, PA: TMS,1993. 47 - 56.
  • 3Spencer D B, Mehrabian R, Flemings M C. Rheological behavior of Sn-15% Pb in the crystallization range[J]. Metallurgical Transactions, 1972, 3 (7) : 1925 -1932.
  • 4Joly P A, Mehrabian R. The rheology of a partially solid alloy[J]. J Mater Scie, 1976, 11(8): 1393-1418.
  • 5Flemings M C. Behavior of metal alloys in the semisolid state[J]. Metallurgical Trans A, 1991, 22(5) : 957- 981.
  • 6Brabazon D, Browne D J. Mechanical stir casting of aluminium alloys from the mushy state., process, micro-structure and mechanical properties[J]. Materials Science and Engineering A, 2002, 326(2) : 370 - 381.
  • 7Vivès C. Effects of electromagnetic vibrations on the microstructure of continuously cast aluminium alloys[J]. Materials Science and Engineering A, 1993, 173:169 - 172.
  • 8Walukas D M, Lebeau S, Deck R F. Advances in thixomolding[A]. Froes F H. Synthesis of Lightweight Metals Ⅲ[C]. Warrendale, PA: The Minerals, Metals & Materials Society, 1999. 277 - 283.
  • 9Avedesian M M, Baker H. Magnesium and Magnesium Alloys[M]. Materials Park, OH: Asm Int, 1998.226 - 234.
  • 10Gabathuler J P, Barras D. Evaluation of various processes for the production of billets with thixotropic properties[A]. Brown S B, Flemonings M C. Proc 2nd Int Conf Proc Semisolid Alloys Composites[C].Warrendale, PA: TMS, 1993. 33-46.

同被引文献16

  • 1冯端.金属物理学(第一卷):结构与缺陷[M].北京:科学出版社,2000.416-466.
  • 2Spencer D B, Mehrabian R, Flemings M C. Rheological behavior of Sn-15% Pb in the crystallization range [J]. Metallurgical Transactions, 1972, 3 (7): 1925-1932.
  • 3Flemings M C, Mehrabian R. Casting semi-solid metals[J]. Modern Casting, 1973,63:31 - 33.
  • 4Flemings M C. Behavior of metal alloys in the semisolid state[J]. Metallurgical Transactions B, 1991, 22B:269 -293.
  • 5Vives C. Elaboration of semisolid alloys by means of new electromagnetic rheocasting processes[J]. Metallurigical Transaction B, 1992, 23B: 189 - 206.
  • 6Young K P, Kynka C P, Courtois J A. Fine Grained Metal Composition[P]. US 4415374, 1983.
  • 7Haga T, Kapranos P. Simple rheocasting processes [J]. Journal of Materials Processing Technology,2002, 130- 131: 594- 598.
  • 8Xia K, Tausig G. Liquidus casting of a wrought aluminum alloy 2618 for thixoforming[J]. Materials Science and Engineering A, 1998, 246:1-10.
  • 9Wang X Y, Jie W Q. Controlled melting process of off-eutectic alloy[J]. Acta Materialia, 2004, 52: 415-422.
  • 10Tzimas E, Zavaliangos A. Evolution of Near-equiaxed Microstructure in the Semisolid State[J]. Materials Science and Engineering A, 289: 228- 240.

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部