期刊文献+

ZAlCu4合金凝固过程相变热传导的有限元分析 被引量:2

Finite Element Analysis on ZAlCu4 Alloy Phase Change Heat Transfer in Solidification
下载PDF
导出
摘要 根据相变热传导的等效热容法有限元理论 ,对ZAlCu4合金凝固过程的温度场进行了瞬态求解 ,分析铸件长度方向上各点处的温度值随时间的变化关系 ,以及在不同时刻长度方向上各点的温度分布。计算结果与实测值吻合得较好 ,这为模拟ZAlCu4合金在凝固过程中微观组织的演化过程奠定了理论基础和前提条件。 The transient temperature field distribution of ZAlCu4 alloy phase change heat transfer process was analyzed based on equivalent thermal entropy method in solidification. Some results were obtained, such as the relationship between temperature and time of different points in the direction of coordinate axis Z, the relationship between temperature and points’ locations on different times, which agreed very well with experiments ones, this will do much contribution to the theoretic base and prerequisite for the simulation of microstructure evolution process ZAlCu4 alloy in solidification.
出处 《铸造技术》 CAS 北大核心 2003年第6期540-542,共3页 Foundry Technology
基金 国防基础科研基金资助项目 (J1 50 0E0 0 2 )
关键词 ZAlCu4合金 凝固相变 温度场 有限元分析 ZAlCu4 alloy Solidification phase change Temperature field Finite element analysis
  • 相关文献

参考文献6

二级参考文献7

  • 1朱宪华.离心铸造大型汽缸套凝固过程的数值模拟及实验研究[J].西安交通大学学报,1986,20(2):23-24.
  • 2Nishmura T et al.Analysis of two-dimensional freezing by the finite element method[].International Chemical Engineering.1985
  • 3Luncerdini V J.Heat transfer with freezing and thawing[]..1991
  • 4Morgan K et al.An improved algorithm for heat conduction problems with phase change[].International Journal for Numerical Methods in Engineering.1978
  • 5Comini G et al.Finite element solution of non-linear heat conduction problems with special reference to phase change[].International Journal for Numerical Methods in Engineering.1974
  • 6Reddy J N,Gartling D K.The finite element method in heat transfer and fluid dynamics[]..1994
  • 7John Crank.Free and moving boundary problems[]..1984

共引文献13

同被引文献47

  • 1刘汉武,王勤峰,郭鹏,刘林.K4169合金叶片熔模铸造过程的温度场及微观组织的耦合模拟[J].钢铁研究学报,2003,15(z1):630-634. 被引量:2
  • 2杨湘杰,郭洪民.半固态浆料制备技术发展动向及其对策[J].江西冶金,2003,23(6):75-79. 被引量:7
  • 3江运喜,谢水生,李兴刚.半固态金属浆料制备新技术[J].锻压技术,2003,28(6):41-47. 被引量:20
  • 4[4]Kiuchi M, Sugiyama S. A new process to manufacture semi-solid alloys[J],ISIJ International, 1995,35(6):790-797.
  • 5[9]Jung H K, Kang C G. Reheating process of cast and wrought aluminum alloys for thixoforging and their globularization mechanism [J]. Journal of Materials Processing Technology, 2000,104(2):244-253.
  • 6Oldfield W. A quantitative approach to casting solidification [J].ASM+Trans, 1966, 59(2): 945-960.
  • 7Hunt J D. Steady state columnar and equiaxed growth of dendrites and eutectic [J].Mater. Sci. Eng, 1984, 65 (1): 75-83.
  • 8Thevoz P H, Desbilles J L, Rappaz M. Modeling of equiaxed microstructure formation in casting [J]. Metall Trans, 1989, 20A(2): 311-322.
  • 9WANG C Y, Beckermann C. A unified solute diffusion model for columnar and equiaxed dendritic alloy solidification [J]. Mater. Sci.Eng, 1993, 171:199-211.
  • 10WANG C Y, Beckermann C. Equiaxed dendritic solidification with convention multiscale/multiphase modeling [J]. Metall Trans,1996, 27A(9): 2754-2764.

引证文献2

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部