期刊文献+

一种中温固化高强度环氧胶粘剂的研制 被引量:3

Development of a high strength epoxy resin adhesive cured at moderate temperature
下载PDF
导出
摘要 以E-51、E-44为主体树脂,加入奇士增韧剂研制出一种中温固化高强度环氧胶粘剂。该胶粘剂在加入占粘料质量分数30%左右的增韧剂后,选用自制固化剂SL-1,在50℃×1h+80℃×1h条件下固化,其拉伸剪切强度可达42.1MPa。 A high strength epoxy resin adhesive cured at moderate temperature was prepared with E-51 and E-44(as the host binder) and Qishi type toughener. When added toughener was about 30% by mass percent to binder mass, the self-made SL-1 was used as the curing agent and the adhesive was cured at the condition of 50℃× 1 h + 80℃×1h.the tensile-shear strength was obtained to be 42. 1MPa.
出处 《粘接》 CAS 2003年第5期19-21,共3页 Adhesion
关键词 中温固化 环氧胶粘剂 研制 环氧树脂 增韧剂 拉伸剪切强度 Epoxy adhesive Moderate temperature curing Toughener Tensile-shear strength
  • 相关文献

参考文献1

  • 1.化学工业标准汇编(胶粘剂)[M].北京:中国标准出版社,1997.69-72.

同被引文献11

  • 1亢雅君,殷立新.环氧树脂中温固化促进剂评述[J].热固性树脂,1995,10(2):47-51. 被引量:26
  • 2毕春华,甘常林,赵世琦.环氧树脂固化促进剂作用特性研究[J].热固性树脂,1996,11(2):34-37. 被引量:12
  • 3李志君,李学成.中温固化环氧树脂复合材料基体的研究[J].热固性树脂,1997,12(1):25-29. 被引量:10
  • 4凌爱莲 杨冬玲 桑洪勋 颜河.聚氨酯—环氧树脂胶粘剂的研究[J].CHINAADHENSIVES,2002,11(4):8-8.
  • 5刘东勋,预浸方法和环境对3234树脂复合材料耐湿热性能的影响[A].第十三届全国复合材料学术会议论文集[C].2004,1021-1025.
  • 6张未,张步云.铁路区间无缝线路[M].北京:中国铁道出版社,2000:54-57.
  • 7David C Alexander, Bruce L Burton, Howard P Klein. New developments in polyetheramine curing agents [ M ]. Huntsman Petrochemical Corporation, 2005:1-7.
  • 8Harold G Waddill, Austin Tex. Non- crystallizing epoxy resin accelerator: US, 4189564[P]. 1980 - 02 - 19.
  • 9Fuping Li. A study of the interphase in aluminum/epoxy bonded joints [D], Michigan: Michigan Technological University, 2003, 80-81.
  • 10何培新,肖卫东.环氧树脂固化物的阻燃化研究[J].辽宁化工,1998,27(4):187-191. 被引量:14

引证文献3

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部